Tag Archives: excavator chain roller

China Standard Chain Manufacturer 32A-2 a Series Short Pitch Precision Duplex Transmission Roller Chains and Bush Chains for Excavator Forklift

Product Description

A Series Short Pitch Precision Duplex Roller Chains & Bush Chains

ISO/ANSI/ DIN
Chain No.
Chain No. Pitch

P
mm

Roller diameter

d1max
mm

Width between inner plates
b1min
mm
Pin diameter

d2max
mm

Pin length Inner plate depth
h2max
mm
Plate thickness

Tmax
mm

Transverse                     Pt 
mm
Tensile strength

Qmin
kN/lbf

Average tensile strength
Q0
kN
Weight per meter
q  
kg/m
Lmax
mm
Lcmax
mm
160-2 32A-2 50.800 28.58 31.55 14.27 123.3 128.1 47.80 6.40 58.55 453.60/103091 533.8 20.14

*Bush chain: d1 in the table indicates the external diameter of the bush

ROLLER CHAIN

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.

CONSTRUCTION OF THE CHAIN

Two different sizes of roller chain, showing construction.
There are 2 types of links alternating in the bush roller chain. The first type is inner links, having 2 inner plates held together by 2 sleeves or bushings CZPT which rotate 2 rollers. Inner links alternate with the second type, the outer links, consisting of 2 outer plates held together by pins passing through the bushings of the inner links. The “bushingless” roller chain is similar in operation though not in construction; instead of separate bushings or sleeves holding the inner plates together, the plate has a tube stamped into it protruding from the hole which serves the same purpose. This has the advantage of removing 1 step in assembly of the chain.

The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. The original power transmission chain varieties lacked rollers and bushings, with both the inner and outer plates held by pins which directly contacted the sprocket teeth; however this configuration exhibited extremely rapid wear of both the sprocket teeth, and the plates where they pivoted on the pins. This problem was partially solved by the development of bushed chains, with the pins holding the outer plates passing through bushings or sleeves connecting the inner plates. This distributed the wear over a greater area; however the teeth of the sprockets still wore more rapidly than is desirable, from the sliding friction against the bushings. The addition of rollers surrounding the bushing sleeves of the chain and provided rolling contact with the teeth of the sprockets resulting in excellent resistance to wear of both sprockets and chain as well. There is even very low friction, as long as the chain is sufficiently lubricated. Continuous, clean, lubrication of roller chains is of primary importance for efficient operation as well as correct tensioning.

LUBRICATION

Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]

There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.

Many oil-based lubricants attract dirt and other particles, eventually forming an CZPT paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.

VARIANTS DESIGN

Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.

Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.

Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.

USE

An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CZPT the bar.

Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CZPT flight, a system known as Thrust vectoring.

WEAR

 

The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).

With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.

The lengthening due to wear of a chain is calculated by the following formula:

M = the length of a number of links measured

S = the number of links measured

P = Pitch

In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.

CHAIN STRENGTH

The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.

The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.

CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
Surface Treatment: Polishing
Samples:
US$ 0/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

bush chain

How does a bush chain handle misalignment in a system?

A bush chain is designed to accommodate a certain degree of misalignment within a system. Here’s how a bush chain handles misalignment:

1. Flexibility: The construction of a bush chain allows it to flex and adjust to minor misalignments. The bushings, which are inserted into the chain’s links, provide a degree of flexibility and allow the chain to move smoothly even when the sprockets are slightly misaligned.

2. Self-Alignment: The self-lubricating properties of some bush chains contribute to their ability to handle misalignment. The lubrication helps reduce friction and allows the chain to self-align by adjusting its position to minimize stress and binding caused by misaligned sprockets.

3. Tolerance for Misalignment: Bush chains are designed with specific clearance between the bushings and pins. This clearance provides some tolerance for misalignment. It allows the chain to accommodate slight angular or parallel misalignment between the sprockets without causing excessive wear or damage.

4. Compensation for Load Variances: In systems where load distribution is not uniform, such as conveyor systems, bush chains can help compensate for load variances. The flexibility of the chain allows it to adapt to changes in load distribution and adjust accordingly, reducing stress on the chain and sprockets.

It is important to note that while bush chains can handle minor misalignment, excessive misalignment should be avoided. Excessive misalignment can cause accelerated wear, increased noise, and reduced chain life. Proper alignment and regular maintenance are essential to ensure optimal performance and longevity of the bush chain system.

bush chain

How do you ensure proper tensioning and alignment of a bush chain?

Proper tensioning and alignment of a bush chain are crucial for its optimal performance and longevity. Here are the steps to ensure proper tensioning and alignment:

1. Tensioning:

– Consult the manufacturer’s guidelines: Refer to the manufacturer’s specifications or guidelines for the recommended tensioning method and tension values specific to the bush chain you are using.

– Check the sag: Measure the sag of the chain between two sprockets. The sag should be within the recommended range provided by the manufacturer. Adjust the tension as necessary to achieve the proper sag.

– Use a tensioning device: Depending on the application, you may use a tensioning device such as a tensioner or an idler sprocket to achieve the desired tension. These devices help maintain the tension over time as the chain wears.

2. Alignment:

– Visual inspection: Visually inspect the alignment of the chain with the sprockets. Ensure that the chain is properly seated on the sprocket teeth and running parallel to the sprocket shaft.

– Sprocket alignment: Check the alignment of the sprockets themselves. They should be aligned with each other and positioned correctly on their respective shafts.

– Adjustment: If misalignment is detected, make the necessary adjustments to align the chain and sprockets. This may involve repositioning the sprockets or adjusting the tensioning devices.

3. Regular inspection and maintenance:

– Periodically check the tension and alignment of the bush chain during routine maintenance. This ensures that any changes or deviations can be detected and corrected promptly.

– Monitor wear and elongation: Over time, bush chains may experience wear and elongation. Regularly measure the chain length or inspect for signs of elongation to determine if chain replacement or adjustment is necessary.

Proper tensioning and alignment of a bush chain optimize its performance, minimize wear, and reduce the risk of premature failure. Following the manufacturer’s guidelines and performing regular inspections and maintenance will help ensure the proper tensioning and alignment of the bush chain in your application.

bush chain

How do you select the right bush chain for your application?

Choosing the right bush chain for your application is essential to ensure optimal performance and longevity. Here are some factors to consider when selecting a bush chain:

1. Load Capacity: Evaluate the maximum load that the chain will need to transmit. Consider factors such as weight, acceleration, and shock loads. Choose a bush chain with a load capacity that exceeds the anticipated load to ensure reliable operation.

2. Speed: Determine the operating speed of the chain. Higher speeds may require chains with specialized designs to minimize wear, reduce friction, and maintain accurate timing.

3. Environmental Conditions: Assess the environmental conditions in which the chain will operate. Consider factors such as temperature, humidity, dust, chemicals, and exposure to corrosive substances. Select a bush chain that is designed to withstand the specific conditions of your application.

4. Size and Configuration: Determine the required chain size based on the available space and the dimensions of the sprockets or pulleys. Consider the pitch, width, and overall dimensions of the chain. Additionally, assess whether a standard or custom configuration is needed to meet the application requirements.

5. Lubrication Requirements: Determine the lubrication method and frequency required for the chain. Some bush chains are self-lubricating, while others may require regular lubrication. Consider the availability of lubrication systems and the maintenance requirements of the chain.

6. Reliability and Durability: Assess the expected operational lifespan and the reliability requirements of your application. Look for bush chains from reputable manufacturers known for producing high-quality, durable products. Consider factors such as wear resistance, fatigue strength, and overall reliability.

7. Cost: Evaluate the cost-effectiveness of the bush chain, considering both the initial investment and long-term maintenance costs. Balance the performance requirements with the available budget.

Consult with a knowledgeable supplier or engineer to ensure you select the right bush chain that meets your specific application requirements. They can provide guidance based on their expertise and help you choose a chain that offers optimal performance and durability.

China Standard Chain Manufacturer 32A-2 a Series Short Pitch Precision Duplex Transmission Roller Chains and Bush Chains for Excavator Forklift  China Standard Chain Manufacturer 32A-2 a Series Short Pitch Precision Duplex Transmission Roller Chains and Bush Chains for Excavator Forklift
editor by CX 2023-08-08

China Jcb Track Link Chain for Js200sc Js220LC Js290LC Js360LC Excavator Parts roller chain accessories

Merchandise Description

Skilled Excavator&Bulldozer Aftermarket Undercarriage Areas Maker

Factory Supplying Directly, Super Good quality with Competitive Price!

Product Characteristics:

Solution Identify: JCB JS200 JS220 JS290 JS360 Excavator Undercarriage Elements Keep track of Website link Assy Track Chain with Shoe Assembly Keep track of Team
Technological: Forging/Casting
Area Hardness: HRC52-fifty eight, Deepth:8mm-12mm
Colours: Black or Yellow
Finishing: Easy
Applicable Industries: Equipment Repair Shops, Development works
Material: 35MnB
Relevant Products: Keep track of Url, Observe Pad, Monitor Roller, Idler. Sprockets, Provider Roller, Tensioner for Excavators And Dozers

Confirming Proportions With Us Ahead of Ordering
Make Positive the Areas Matching with Your Machine

XIHU (WEST LAKE) DIS.N Excavator&Bulldozer Undercarriage Parts&Parts Which includes:

  • Keep track of Chain With Keep track of Shoe Assembly
  • Segments for Hefty Duty Excavator and Bulldozer
  • Generate Sprockets
  • Observe Roller
  • Carriaer Roller
  • Idler
  • Tensioner Spring
  • Bolts&Nuts for All Element

Associated Models:

THE Models FOR EXCAVATOR/BULLDOZER 
FOR HITACHI 
EX40-1 EX40-2 EX55 EX60 EX60-2 EX60-3 EX60-5 EX70 EX75
EX100 EX110 EX120 EX120-one EX120-2 EX120-three EX120-five EX130-1 EX200-one
EX200-2 EX200-three EX200-5 EX220-three EX220-five EX270 EX300 EX300-1 EX300-two
EX300-three EX300-5 EX300A EX330 EX370 EX400-1 EX400-two EX400-3 EX400-5
EX450 ZAX30 ZAX55 ZAX200 ZAX200-2 ZAX330 ZAX450-1 ZAX450-three ZAX450-5
ZX110 ZX120 ZX200 ZX200-one ZX200-3 ZX200-5G ZX200LC-3 ZX210 ZX210-three
ZX210-five ZX225 ZX240 ZX250 ZX270 ZX300 ZX330 ZX330C ZX350
ZX450 ZX450LC ZX500 ZX500LC ZX520 ZX670 ZX690 ZX870 ZX130
ZX170 ZX170LC ZX195 ZX260 ZX360 ZX360LC ZX400 ZX470 ZX490
FOR KOMATSU(EXCAVATOR)
PC20-7 PC30 PC30-3 PC30-five PC30-6 PC40-seven PC45 PC45-2 PC55
PC120-6 PC130 PC130-7 PC200 PC200-1 PC200-three PC200-5 PC200-six PC200-seven
PC200-eight PC210-six PC220-1 PC220-3 PC220-6 PC220-seven PC220-8 PC270-seven PC202B
PC220LC-6 PC220LC-8 PC240 PC300 PC300-3 PC300-five PC300-6 PC300-seven PC300-7K
PC300LC-7 PC350-6/seven PC400 PC400-3 PC400-5 PC400-six PC400LC-seven PC450-six PC450-7
PC600 PC650 PC750 PC800 PC1100 PC1250 PC2000 PC360 PC460
FOR KOMATSU(BULLDOZER)
D20  D31 D50 D60 D61 D61PX D65A D65P D64P-twelve
D80 D85 D155 D275 D355 D85PX D85EX D65EX D65PX
D65E D68 D68ESS D75 D75S D85ESS D155 D155A D155AX
D275 D275AX D355 D475          
FOR CATERPILLAR(EXCAVATOR)
E200B E200-five E320D E215 E320DL E324D E324DL E329DL E300L
E320S E320 E320DL E240 E120-1 E311 E312B E320BL E345
E324 E140 E300B E330C E120 E70 E322C E322B E325
E325L E330 E450 CAT225 CAT312B CAT315 CAT320 CAT320C CAT320BL
CAT330 CAT322 CAT245 CAT325 CAT320L CAT973  CAT939C CAT963C CAT313
CAT323 CAT318 CAT326 CAT328 CAT329 CAT336 CAT340 CAT345 CAT349
FOR CATERPILLAR(BULLDOZER)
D3 D3B D3C D3D D4 D4C D4D D4E D4H
D5 D5B D5C D5D D5H D5M D6 D6C D6D
D6H D6M D6R D6G D6N D7 D7C D7D D7E
D7F D7G D7H D7R D8 D8R D8N D8H D8T
D8L D8K D8G D8M D9 D9L D9N D9R D9T
D10 D10R D10N D10T D11 D11R D11N    
FOR KOBELCO
SK120-six SK120-five SK210-8 SK210LC-8 SK220 SK220-one SK220-3 SK220-5/6 SK200 
SK200 SK200  SK200-3 SK200-six SK200-eight SK200-5/6 SK60 SK290 SK100
SK230 SK250 SK250-eight SK260LC-8 SK300 SK300-two SK300-four SK310 SK320
SK330-8 SK330 SK350LC-8 SK235SR SK450 SK480 SK30-six    
FOR SUMITOMO
SH120  SH120-three SH200 SH210-five SH200 SH220-3 SH220-5/seven SH290-three SH350-5/seven
SH220 SH280 SH290-7 SH260 SH300 SH300-three SH300-5 SH350 SH60
FOR VOLVO
EC160C EC160D EC180B EC180C EC180D EC210 EC210 EC210B EC240B
EC290 EC290B EC240 EC55 EC360 EC360B EC380D EC460 EC460B
EC460C EC700 EC140 EC140B EC160B EC350 EC350DL EC480 EC340
FOR LIEBHERR
R914 R924 R934 R944 R916 R926 R936 R954 R966
R974 R984              
FOR KUBOTA
JH60-7 JH115 JH135 JH161 JH185        
FOR DAEWOO
DH200 DH220-3 DH220 DH220S DH280-two DH280-three DH55 DH258 DH130
DH370 DH80 DH500 DH450 DH225 DH150 DH330 DH400 DH580
FOR HYUNDAI
R60-five R60-seven R80-seven R200 R200-3 R210 R210-1 R210-9 R210LC
R210LC-seven R225 R225-three R225-seven R250 R250-7 R290 R290LC R290LC-7
R320 R360 R954 R205 R210-five R215 R230 R235 R275
R300 R385 R485            
FOR KATO
HD512 HD1430 HD512III HD820III HD820R HD1430III HD700VI HD1250VII HD250SE
HD400SE HD500SE HD1880            
FOR DOOSAN
DX225 DX225LC DX258 DX300 DX300LCA DX420 DX430 DX140 DX150
DX220 DX250 DX255 DX260 DX370 DX480 DX520    
FOR SHXIHU (WEST LAKE) DIS.I
SD13-two DH16J2XL DH16J2LGP SD16 SD22 SD32      
FOR Scenario
CX210 CX210B CX210C CX210D CX210LC CX225 CX235 CX235C CX240
CX240C CX245 CX250 CX250C CX300 CX300C CX330 CX330C CX350
CX350C CX460 CX460LC CX470 CX470C CX490 CX490D CX700 CX700B
CX750 CX750D              
FOR JCB
JS200 JS200SC JS210 JS210SC JS220 JS220LC JS230 JS230LC JS240
JS240LC JS290 JS290LC JS300 JS300LC JS330 JS330LC    
FOR XCMG
XE55DA XE60DA XE65DA XE75DA XE80C XE80D XE85C XE85D XE135D
XE155DK XE150D XE155D XE200DA XE200D XE200C XE205DA XE215DA XE215C
XE215D XE215HB XE225DK XE230C XE245DK XE240D XE260C XE265C XE270DK
XE305D XE335DK XE335C XE370D XE370DK XE370CA XE370C XE380DK XE470D
XE490DK XE490CK XE500HB XE520DK XE550DK XE750D XE750G XE950D XE950G
XE950DA XE55 XE60 XE65 XE75 XE80 XE85 XE135 XE150
XE155 XE200 XE205 XE215 XE225 XD230 XE240 XE245 XE260
XE265 XE270 XE305 XE335 XE370 XE380 XE470 XE490 XE500
XE520 XE550 XE750 XE950          
FOR MITSUBISHI
MS30 MS110 MS110-three MS110-five MS110-eight MS180      
FOR SAMSUNG
SE210 SE280 SE320            
FOR IHI
IHI35 IHI50 IHI55 IHI60 IHI75        
FOR YMMA
YM15 YM30 YM35 YM55 YM65 YM85      
FOR LIUGONG
LG906C LG907 LG200 LG220 LG925 LG934      

Packing&Shipping
FAQ

 

1. You are a trader or a manufacture?
We are an industry and trade integration business.

2. How can I be sure the part will fit my excavator/bulldozer?
Give us correct model number/machine serial number/ any numbers on the parts itself. Or measure the parts give us dimension or drawing.

3. How about the payment terms?
We usually accept T/T(Wire Transfer). other terms also could be negotiated.

four. What is your minimum order?
It depends on what you are buying. Normally, 1 pcs also can be suppllied.

5. What is your delivery time?
FOB HangZhou or any Chinese port : 20 days . If there are any parts in stock , our delivery time is only 1-5 days.

6. What about Quality Control?
We have a perfect QC system for the perfect products. A team who will detect the product quality and specification piece carefully, monitoring every production process until packing is complete, to ensure product safety into container.
 

Get in touch with Us:

Freda Wang
—————-
Revenue Manager

ZheJiang XIHU (WEST LAKE) DIS.N Equipment CO., LTD.
Add: Lingong Highway, HangZhou Metropolis, ZheJiang Province, China
  
Cell: 

 

US $999-1,999
/ Set
|
1 Set

(Min. Order)

###

After-sales Service: Technical Support
Warranty: 1 Year
Type: Crawler Undercarriage Parts
Application: Excavator Undercarriage Parts
Certification: CE, ISO9001: 2000
Condition: New

###

Samples:
US$ 100/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product Name: JCB JS200 JS220 JS290 JS360 Excavator Undercarriage Parts Track Link Assy Track Chain with Shoe Assembly Track Group
Technical: Forging/Casting
Surface Hardness: HRC52-58, Deepth:8mm-12mm
Colors: Black or Yellow
Finishing: Smooth
Applicable Industries: Machinery Repair Shops, Construction works
Material: 35MnB
Related Products: Track Link, Track Pad, Track Roller, Idler. Sprockets, Carrier Roller, Tensioner for Excavators And Dozers

###

THE MODELS FOR EXCAVATOR/BULLDOZER 
FOR HITACHI 
EX40-1 EX40-2 EX55 EX60 EX60-2 EX60-3 EX60-5 EX70 EX75
EX100 EX110 EX120 EX120-1 EX120-2 EX120-3 EX120-5 EX130-1 EX200-1
EX200-2 EX200-3 EX200-5 EX220-3 EX220-5 EX270 EX300 EX300-1 EX300-2
EX300-3 EX300-5 EX300A EX330 EX370 EX400-1 EX400-2 EX400-3 EX400-5
EX450 ZAX30 ZAX55 ZAX200 ZAX200-2 ZAX330 ZAX450-1 ZAX450-3 ZAX450-5
ZX110 ZX120 ZX200 ZX200-1 ZX200-3 ZX200-5G ZX200LC-3 ZX210 ZX210-3
ZX210-5 ZX225 ZX240 ZX250 ZX270 ZX300 ZX330 ZX330C ZX350
ZX450 ZX450LC ZX500 ZX500LC ZX520 ZX670 ZX690 ZX870 ZX130
ZX170 ZX170LC ZX195 ZX260 ZX360 ZX360LC ZX400 ZX470 ZX490
FOR KOMATSU(EXCAVATOR)
PC20-7 PC30 PC30-3 PC30-5 PC30-6 PC40-7 PC45 PC45-2 PC55
PC120-6 PC130 PC130-7 PC200 PC200-1 PC200-3 PC200-5 PC200-6 PC200-7
PC200-8 PC210-6 PC220-1 PC220-3 PC220-6 PC220-7 PC220-8 PC270-7 PC202B
PC220LC-6 PC220LC-8 PC240 PC300 PC300-3 PC300-5 PC300-6 PC300-7 PC300-7K
PC300LC-7 PC350-6/7 PC400 PC400-3 PC400-5 PC400-6 PC400LC-7 PC450-6 PC450-7
PC600 PC650 PC750 PC800 PC1100 PC1250 PC2000 PC360 PC460
FOR KOMATSU(BULLDOZER)
D20  D31 D50 D60 D61 D61PX D65A D65P D64P-12
D80 D85 D155 D275 D355 D85PX D85EX D65EX D65PX
D65E D68 D68ESS D75 D75S D85ESS D155 D155A D155AX
D275 D275AX D355 D475          
FOR CATERPILLAR(EXCAVATOR)
E200B E200-5 E320D E215 E320DL E324D E324DL E329DL E300L
E320S E320 E320DL E240 E120-1 E311 E312B E320BL E345
E324 E140 E300B E330C E120 E70 E322C E322B E325
E325L E330 E450 CAT225 CAT312B CAT315 CAT320 CAT320C CAT320BL
CAT330 CAT322 CAT245 CAT325 CAT320L CAT973  CAT939C CAT963C CAT313
CAT323 CAT318 CAT326 CAT328 CAT329 CAT336 CAT340 CAT345 CAT349
FOR CATERPILLAR(BULLDOZER)
D3 D3B D3C D3D D4 D4C D4D D4E D4H
D5 D5B D5C D5D D5H D5M D6 D6C D6D
D6H D6M D6R D6G D6N D7 D7C D7D D7E
D7F D7G D7H D7R D8 D8R D8N D8H D8T
D8L D8K D8G D8M D9 D9L D9N D9R D9T
D10 D10R D10N D10T D11 D11R D11N    
FOR KOBELCO
SK120-6 SK120-5 SK210-8 SK210LC-8 SK220 SK220-1 SK220-3 SK220-5/6 SK200 
SK200 SK200  SK200-3 SK200-6 SK200-8 SK200-5/6 SK60 SK290 SK100
SK230 SK250 SK250-8 SK260LC-8 SK300 SK300-2 SK300-4 SK310 SK320
SK330-8 SK330 SK350LC-8 SK235SR SK450 SK480 SK30-6    
FOR SUMITOMO
SH120  SH120-3 SH200 SH210-5 SH200 SH220-3 SH220-5/7 SH290-3 SH350-5/7
SH220 SH280 SH290-7 SH260 SH300 SH300-3 SH300-5 SH350 SH60
FOR VOLVO
EC160C EC160D EC180B EC180C EC180D EC210 EC210 EC210B EC240B
EC290 EC290B EC240 EC55 EC360 EC360B EC380D EC460 EC460B
EC460C EC700 EC140 EC140B EC160B EC350 EC350DL EC480 EC340
FOR LIEBHERR
R914 R924 R934 R944 R916 R926 R936 R954 R966
R974 R984              
FOR KUBOTA
JH60-7 JH115 JH135 JH161 JH185        
FOR DAEWOO
DH200 DH220-3 DH220 DH220S DH280-2 DH280-3 DH55 DH258 DH130
DH370 DH80 DH500 DH450 DH225 DH150 DH330 DH400 DH580
FOR HYUNDAI
R60-5 R60-7 R80-7 R200 R200-3 R210 R210-1 R210-9 R210LC
R210LC-7 R225 R225-3 R225-7 R250 R250-7 R290 R290LC R290LC-7
R320 R360 R954 R205 R210-5 R215 R230 R235 R275
R300 R385 R485            
FOR KATO
HD512 HD1430 HD512III HD820III HD820R HD1430III HD700VI HD1250VII HD250SE
HD400SE HD500SE HD1880            
FOR DOOSAN
DX225 DX225LC DX258 DX300 DX300LCA DX420 DX430 DX140 DX150
DX220 DX250 DX255 DX260 DX370 DX480 DX520    
FOR SHANTUI
SD13-2 DH16J2XL DH16J2LGP SD16 SD22 SD32      
FOR CASE
CX210 CX210B CX210C CX210D CX210LC CX225 CX235 CX235C CX240
CX240C CX245 CX250 CX250C CX300 CX300C CX330 CX330C CX350
CX350C CX460 CX460LC CX470 CX470C CX490 CX490D CX700 CX700B
CX750 CX750D              
FOR JCB
JS200 JS200SC JS210 JS210SC JS220 JS220LC JS230 JS230LC JS240
JS240LC JS290 JS290LC JS300 JS300LC JS330 JS330LC    
FOR XCMG
XE55DA XE60DA XE65DA XE75DA XE80C XE80D XE85C XE85D XE135D
XE155DK XE150D XE155D XE200DA XE200D XE200C XE205DA XE215DA XE215C
XE215D XE215HB XE225DK XE230C XE245DK XE240D XE260C XE265C XE270DK
XE305D XE335DK XE335C XE370D XE370DK XE370CA XE370C XE380DK XE470D
XE490DK XE490CK XE500HB XE520DK XE550DK XE750D XE750G XE950D XE950G
XE950DA XE55 XE60 XE65 XE75 XE80 XE85 XE135 XE150
XE155 XE200 XE205 XE215 XE225 XD230 XE240 XE245 XE260
XE265 XE270 XE305 XE335 XE370 XE380 XE470 XE490 XE500
XE520 XE550 XE750 XE950          
FOR MITSUBISHI
MS30 MS110 MS110-3 MS110-5 MS110-8 MS180      
FOR SAMSUNG
SE210 SE280 SE320            
FOR IHI
IHI35 IHI50 IHI55 IHI60 IHI75        
FOR YMMA
YM15 YM30 YM35 YM55 YM65 YM85      
FOR LIUGONG
LG906C LG907 LG200 LG220 LG925 LG934      

###

Jcb Track Link Chain for Js200sc Js220LC Js290LC Js360LC Excavator Parts Freda Wang
—————-
Sales Manager



SHANDONG BOLIN MACHINERY CO., LTD.
Add: Lingong Road, Linyi City, Shandong Province, China
  
Mobile: +86 150 6592 9360
US $999-1,999
/ Set
|
1 Set

(Min. Order)

###

After-sales Service: Technical Support
Warranty: 1 Year
Type: Crawler Undercarriage Parts
Application: Excavator Undercarriage Parts
Certification: CE, ISO9001: 2000
Condition: New

###

Samples:
US$ 100/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product Name: JCB JS200 JS220 JS290 JS360 Excavator Undercarriage Parts Track Link Assy Track Chain with Shoe Assembly Track Group
Technical: Forging/Casting
Surface Hardness: HRC52-58, Deepth:8mm-12mm
Colors: Black or Yellow
Finishing: Smooth
Applicable Industries: Machinery Repair Shops, Construction works
Material: 35MnB
Related Products: Track Link, Track Pad, Track Roller, Idler. Sprockets, Carrier Roller, Tensioner for Excavators And Dozers

###

THE MODELS FOR EXCAVATOR/BULLDOZER 
FOR HITACHI 
EX40-1 EX40-2 EX55 EX60 EX60-2 EX60-3 EX60-5 EX70 EX75
EX100 EX110 EX120 EX120-1 EX120-2 EX120-3 EX120-5 EX130-1 EX200-1
EX200-2 EX200-3 EX200-5 EX220-3 EX220-5 EX270 EX300 EX300-1 EX300-2
EX300-3 EX300-5 EX300A EX330 EX370 EX400-1 EX400-2 EX400-3 EX400-5
EX450 ZAX30 ZAX55 ZAX200 ZAX200-2 ZAX330 ZAX450-1 ZAX450-3 ZAX450-5
ZX110 ZX120 ZX200 ZX200-1 ZX200-3 ZX200-5G ZX200LC-3 ZX210 ZX210-3
ZX210-5 ZX225 ZX240 ZX250 ZX270 ZX300 ZX330 ZX330C ZX350
ZX450 ZX450LC ZX500 ZX500LC ZX520 ZX670 ZX690 ZX870 ZX130
ZX170 ZX170LC ZX195 ZX260 ZX360 ZX360LC ZX400 ZX470 ZX490
FOR KOMATSU(EXCAVATOR)
PC20-7 PC30 PC30-3 PC30-5 PC30-6 PC40-7 PC45 PC45-2 PC55
PC120-6 PC130 PC130-7 PC200 PC200-1 PC200-3 PC200-5 PC200-6 PC200-7
PC200-8 PC210-6 PC220-1 PC220-3 PC220-6 PC220-7 PC220-8 PC270-7 PC202B
PC220LC-6 PC220LC-8 PC240 PC300 PC300-3 PC300-5 PC300-6 PC300-7 PC300-7K
PC300LC-7 PC350-6/7 PC400 PC400-3 PC400-5 PC400-6 PC400LC-7 PC450-6 PC450-7
PC600 PC650 PC750 PC800 PC1100 PC1250 PC2000 PC360 PC460
FOR KOMATSU(BULLDOZER)
D20  D31 D50 D60 D61 D61PX D65A D65P D64P-12
D80 D85 D155 D275 D355 D85PX D85EX D65EX D65PX
D65E D68 D68ESS D75 D75S D85ESS D155 D155A D155AX
D275 D275AX D355 D475          
FOR CATERPILLAR(EXCAVATOR)
E200B E200-5 E320D E215 E320DL E324D E324DL E329DL E300L
E320S E320 E320DL E240 E120-1 E311 E312B E320BL E345
E324 E140 E300B E330C E120 E70 E322C E322B E325
E325L E330 E450 CAT225 CAT312B CAT315 CAT320 CAT320C CAT320BL
CAT330 CAT322 CAT245 CAT325 CAT320L CAT973  CAT939C CAT963C CAT313
CAT323 CAT318 CAT326 CAT328 CAT329 CAT336 CAT340 CAT345 CAT349
FOR CATERPILLAR(BULLDOZER)
D3 D3B D3C D3D D4 D4C D4D D4E D4H
D5 D5B D5C D5D D5H D5M D6 D6C D6D
D6H D6M D6R D6G D6N D7 D7C D7D D7E
D7F D7G D7H D7R D8 D8R D8N D8H D8T
D8L D8K D8G D8M D9 D9L D9N D9R D9T
D10 D10R D10N D10T D11 D11R D11N    
FOR KOBELCO
SK120-6 SK120-5 SK210-8 SK210LC-8 SK220 SK220-1 SK220-3 SK220-5/6 SK200 
SK200 SK200  SK200-3 SK200-6 SK200-8 SK200-5/6 SK60 SK290 SK100
SK230 SK250 SK250-8 SK260LC-8 SK300 SK300-2 SK300-4 SK310 SK320
SK330-8 SK330 SK350LC-8 SK235SR SK450 SK480 SK30-6    
FOR SUMITOMO
SH120  SH120-3 SH200 SH210-5 SH200 SH220-3 SH220-5/7 SH290-3 SH350-5/7
SH220 SH280 SH290-7 SH260 SH300 SH300-3 SH300-5 SH350 SH60
FOR VOLVO
EC160C EC160D EC180B EC180C EC180D EC210 EC210 EC210B EC240B
EC290 EC290B EC240 EC55 EC360 EC360B EC380D EC460 EC460B
EC460C EC700 EC140 EC140B EC160B EC350 EC350DL EC480 EC340
FOR LIEBHERR
R914 R924 R934 R944 R916 R926 R936 R954 R966
R974 R984              
FOR KUBOTA
JH60-7 JH115 JH135 JH161 JH185        
FOR DAEWOO
DH200 DH220-3 DH220 DH220S DH280-2 DH280-3 DH55 DH258 DH130
DH370 DH80 DH500 DH450 DH225 DH150 DH330 DH400 DH580
FOR HYUNDAI
R60-5 R60-7 R80-7 R200 R200-3 R210 R210-1 R210-9 R210LC
R210LC-7 R225 R225-3 R225-7 R250 R250-7 R290 R290LC R290LC-7
R320 R360 R954 R205 R210-5 R215 R230 R235 R275
R300 R385 R485            
FOR KATO
HD512 HD1430 HD512III HD820III HD820R HD1430III HD700VI HD1250VII HD250SE
HD400SE HD500SE HD1880            
FOR DOOSAN
DX225 DX225LC DX258 DX300 DX300LCA DX420 DX430 DX140 DX150
DX220 DX250 DX255 DX260 DX370 DX480 DX520    
FOR SHANTUI
SD13-2 DH16J2XL DH16J2LGP SD16 SD22 SD32      
FOR CASE
CX210 CX210B CX210C CX210D CX210LC CX225 CX235 CX235C CX240
CX240C CX245 CX250 CX250C CX300 CX300C CX330 CX330C CX350
CX350C CX460 CX460LC CX470 CX470C CX490 CX490D CX700 CX700B
CX750 CX750D              
FOR JCB
JS200 JS200SC JS210 JS210SC JS220 JS220LC JS230 JS230LC JS240
JS240LC JS290 JS290LC JS300 JS300LC JS330 JS330LC    
FOR XCMG
XE55DA XE60DA XE65DA XE75DA XE80C XE80D XE85C XE85D XE135D
XE155DK XE150D XE155D XE200DA XE200D XE200C XE205DA XE215DA XE215C
XE215D XE215HB XE225DK XE230C XE245DK XE240D XE260C XE265C XE270DK
XE305D XE335DK XE335C XE370D XE370DK XE370CA XE370C XE380DK XE470D
XE490DK XE490CK XE500HB XE520DK XE550DK XE750D XE750G XE950D XE950G
XE950DA XE55 XE60 XE65 XE75 XE80 XE85 XE135 XE150
XE155 XE200 XE205 XE215 XE225 XD230 XE240 XE245 XE260
XE265 XE270 XE305 XE335 XE370 XE380 XE470 XE490 XE500
XE520 XE550 XE750 XE950          
FOR MITSUBISHI
MS30 MS110 MS110-3 MS110-5 MS110-8 MS180      
FOR SAMSUNG
SE210 SE280 SE320            
FOR IHI
IHI35 IHI50 IHI55 IHI60 IHI75        
FOR YMMA
YM15 YM30 YM35 YM55 YM65 YM85      
FOR LIUGONG
LG906C LG907 LG200 LG220 LG925 LG934      

###

Jcb Track Link Chain for Js200sc Js220LC Js290LC Js360LC Excavator Parts Freda Wang
—————-
Sales Manager



SHANDONG BOLIN MACHINERY CO., LTD.
Add: Lingong Road, Linyi City, Shandong Province, China
  
Mobile: +86 150 6592 9360

Types of roller chains and their applications

There are many factors that can cause premature wear of the roller chain. They include friction, external shocks, and lack of lubrication or adjustment. Here are some tips to help you prevent premature chain wear. Read on to learn more about the different types of roller chains and their applications. You’ll be surprised how quickly the roller chain wears out! Below we have listed some of the most common causes of premature roller chain wear.

Double strand heavy-duty roller chain

If your application requires a heavy-duty chain, a double-strand steel roller chain is an excellent choice. Double-strand steel roller chains are manufactured to reduce stress fatigue and stretch, making them ideal for industrial and logging equipment. This type of chain is also heat-treated and shot-peened for excellent fatigue resistance and strength. Listed below are some of the advantages of double-strand heavy-duty roller chains.
When comparing single-strand and double-strand heavy-duty roller chains, double-strand steel roller chains are generally better. They have twice as many side plates and a working load close to that of a twin-strand steel roller chain. Unlike single-strand steel roller chains, double-strand roller chains are not interchangeable with standard double-sprockets. They use sprockets specially made for double chains.
Double strand chains are particularly strong, resistant to rust and corrosion, and ideal for high-stress applications. They are commonly used in conveyor systems, paper mill equipment, ditches, lifts, seed drills, and various hoisting machinery. They are also used in the wastewater and food processing industries. Chains of this type are used on conveyor lines, so they are an excellent choice for heavy machinery.
chain

Nickel-plated chain

Nickel-plated roller chains are ideal for outdoor work, mildly corrosive environments, and applications requiring a good chain appearance. Nickel plating increases component hardness and improves wear resistance while ensuring that all surfaces are protected. The benefits of nickel-plated roller chains include increased durability, corrosion resistance, and a bright shine. Here are a few reasons to use such a chain. All chains are manufactured to the highest quality and safety standards.
Although slightly corrosive, nickel-plated roller chains are ideal for applications in high salt and high humidity environments. However, nickel plating can peel and chip, so nickel roller chains are not recommended for use in food processing or other environments exposed to corrosive substances. ANSI B29.1 standard chain can be nickel-plated and is ideal for a variety of applications including industrial garage doors and boat lifts.
CZPT USA Corp. is committed to being the premier agricultural and industrial chain supplier in the United States. By focusing on quality, they ensure their chains provide long life and unmatched wear resistance. If you’re looking for a quality plated roller chain, consider choosing a chain from a leading manufacturer. If you need the durability and strength of a nickel roller chain, choose CZPT USA Corp. We manufacture the highest quality chains in the USA.
In addition to high strength, nickel-plated roller chains are also available in elastomer profiles. These types of chains can handle 1/2 to 3/4″ loads, depending on their pitch. They are also ideal for gentle traction on sensitive surfaces. The strength of these chains depends on the type of the main link used in the chain. Nickel-plated roller chains are available in a variety of sizes and are priced to suit a variety of applications.

Stainless steel chain

Stainless steel roller chains are ideal for industrial applications in two harsh environments. They have excellent chemical and corrosion resistance, as well as high strength. Chains are available in three grades to meet various operational needs. 304SS is suitable for food contact applications, while 316SS and 606SS offer excellent corrosion resistance. 600 series stainless steel provides excellent corrosion and wears resistance with precipitation hardened components.
In food processing, stainless steel chains are often exposed to extremely high temperatures and high concentrations of acids, alkalis, and water. They are also resistant to high concentrations of acid and chlorine. And their low magnetic permeability allows them to function properly in hygienic conditions. But stainless steel roller chains also have some disadvantages. Despite their excellent corrosion resistance, these chains are not recommended for use in food processing environments.
Compared to carbon steel, stainless steel roller chains are softer and hold longer. This means it may wear out faster. Since stainless steel is not heat-treated, its surface hardness is different from carbon steel. It retains heat for longer, reducing its tensile strength and extending its lifespan. Nonetheless, stainless steel roller chains are ideal for a variety of industrial applications.
The stainless steel roller chain is made of high-quality material. For example, the Premier series stainless steel roller chains are manufactured in Japan using a special type of stainless steel shot peening process. They also feature a solid roller design that reduces side flex. The Premier range also features highly polished side panels and is available in 10′ boxes, 50′ reels, and 100′ reels. They can also be cut to length if necessary.

Accumulation conveyor

Roller chain accumulation conveyors are designed to transport loads up to 440 lbs or 200 kg. The accumulator chain is located on large idler rollers to ensure quiet operation and the minimum force required to hold the pallet. They are suitable for various applications and can be integrated into the entire processing system. These conveyor belts have T-slots on three sides of the profile frame for connecting brackets and sensors.
Sensors installed in the accumulation area detect objects on the conveyor line and send signals to the motors that power the accumulation area. The motor can be external or built into the drum itself. Other types of sensors use light, such as photosensors. Photoelectric sensors detect objects by emitting and receiving specific wavelengths of light. This option is cost-effective because the sensor rollers are located slightly above the surface of the conveyor line.
Roller chain accumulation conveyors can be constructed of steel or plastic rollers. It can be equipped with staggered or coaxial rollers. Safety cover prevents accidental insertion of fingers into the chain, improving operator safety. The safety cover is compatible with the chain type and required bend radius. These caps are made of plastic clips that fit permanently on the inner links of the chain. They do not interfere with conveyed goods or workpiece carriers.
There are two basic types of accumulation conveyors: free flow and accumulation. Free-flowing chains allow conveyed objects to slide directly onto the chain while stacking chains allow goods to slide under the chain. Accumulation chains are commonly used in the food and packaging industries and have rollers that support conveyed objects. The free-flowing conveyor system eliminates the risk of damaging objects, as the rollers in the accumulation conveyor are in direct contact with the bottom of the cargo.
chain

Custom attachment

Standard accessories for roller chains are available in a variety of styles. Typically, they can be assembled on pin or roller links. When referring to connecting chains, it is important to know how to refer to pitch and center-to-center spacing. The pitch of the roller chain should include inner and outer roller links and must alternate every three pitches. Additionally, you can order custom accessories for pin or roller linkages. Below are some examples of custom accessories for roller chains.
Stainless steel roller chains are one of the most well-known chains for this application. It has a stainless steel 304 finish to create curved and straight lugs. For even more flexibility, you can also request custom accessories such as chain plate holes and pins. For added safety, various accessories can be attached to the single-pitch roller chain. It can also be made with multiple pins or curved lugs.
HKK Chains is stocked with much stainless steel and carbon steel standard connecting chains. Most of the time, they can assemble a custom accessory chain in no time. For example, a single-pitch chain with two connecting holes is called a wide profile. Additionally, chains can be manufactured in a variety of materials, including carbon steel, stainless steel, Lambda, plastic, and Ultra WP. In addition, a wide range of unique accessories is available for special industries.

China Jcb Track Link Chain for Js200sc Js220LC Js290LC Js360LC Excavator Parts     roller chain accessoriesChina Jcb Track Link Chain for Js200sc Js220LC Js290LC Js360LC Excavator Parts     roller chain accessories
editor by czh 2023-01-14

China High-Performance Roller Conveyor Chain Industrial Leaf Stainless/Carbon Steel Chain Transmission Chain Conveyor Motorcycle Timing excavator chain bush

Product Description

 

Product Description

Heat treatment method Harden enamel, tempering, queching
Surface remedy zinc plated, blacken, phopharization, carborized
Procedure Forging( casting)—lathe- tooth shaping—ending—oil washing—Packing ,made by CNC device
Inspection All things are checked and examined extensively during every doing work procedure and right after the merchandise is ultimately produced to guarantee that the greatest top quality item enter into the marketplace.

Organization Profile

In 2571, HangZhou CZPT Machinery Co.,ltd was set up by Ms. Iris and her 2 companions(Mr. Tian and Mr. Yang) in HangZhou city(ZHangZhoug province, China), all 3 Founders are engineers who have much more than averaged 30 several years of encounter. Then simply because the needs of company growth, in 2014, it moved to the present Xihu (West Lake) Dis. Industrial Zone (HangZhou metropolis, ZHangZhoug province, China).

Through our properly-known model ND, CZPT Equipment provides agricultural remedies to agriculture equipment company and distributors throughout the world by way of a full line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, push shafts, sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and many others. Items can be customized as request.

We, CZPT machinery set up a complete high quality administration program and revenue support network to supply customers with higher-top quality products and satisfactory service. Our products are offered in forty provinces and municipalities in China and 36 countries and locations in the entire world, our primary industry is the European market.

Our manufacturing facility

Our sample room

Certifications

Why pick us?

1) Customization: With a powerful R&D crew, and we can build merchandise as necessary. It only takes up to 7 times for us to layout a established of drawings. The generation time for new items is usually fifty days or significantly less.

2) Top quality: We have our possess comprehensive inspection and screening gear, which can make certain the top quality of the merchandise.

three) Capability: Our once-a-year manufacturing ability is more than five hundred,000 sets, also, we also acknowledge tiny quantity orders, to satisfy the demands of different customer’s purchase portions.

4) Services: We emphasis on providing large-high quality merchandise. Our items are in line with international specifications and are mostly exported to Europe, Australia, and other international locations and locations.

5) Cargo: We are shut to HangZhou and ZheJiang ports, to supply the quickest transport support.

Packaging & Shipping and delivery

FAQ

Q: Are you a buying and selling firm or company?
A: We’re manufacturing unit and delivering gearbox ODM & OEM services for the European market place for far more than 10 a long time

Q: Do you offer samples? is it free of charge or further?
A: Yes, we could offer you the sample for totally free demand but do not shell out the expense of freight.

Q: How extended is your shipping and delivery time? What is your terms of payment?
A: Normally it is 40-45 times. The time could vary based on the solution and the degree of customization.
For normal items, the payment is: thirty% T/T in progress,balance prior to cargo.

Q: What is the precise MOQ or cost for your item?
A: As an OEM firm, we can offer and adapt our goods to a wide selection of needs.
Therefore, MOQ and cost could greatly differ with size, content and additional requirements For occasion, costly merchandise or standard goods will usually have a decrease MOQ. You should speak to us with all relevant particulars to get the most exact quotation.

If you have an additional concern, make sure you feel totally free to get in touch with us.

US $1-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Electric Cars, Motorcycle, Marine, Agricultural Machinery, Car
Surface Treatment: Zinc Plated; Painted; Chrome;
Material: Steel, Stainless Steel, Plastic,etc.
Type: Standard Sprocket
Line: One Line, Double, Triplex ……Six-Line
Structure (for Chain): Roller Chain

###

Customization:

###

Heat treatment Harden teeth, tempering, queching
Surface treatment zinc plated, blacken, phopharization, carborized
Process Forging( casting)—lathe- teeth shaping—finishing—oil washing—Packing ,made by CNC machine
Inspection All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product enter into the market.
US $1-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Electric Cars, Motorcycle, Marine, Agricultural Machinery, Car
Surface Treatment: Zinc Plated; Painted; Chrome;
Material: Steel, Stainless Steel, Plastic,etc.
Type: Standard Sprocket
Line: One Line, Double, Triplex ……Six-Line
Structure (for Chain): Roller Chain

###

Customization:

###

Heat treatment Harden teeth, tempering, queching
Surface treatment zinc plated, blacken, phopharization, carborized
Process Forging( casting)—lathe- teeth shaping—finishing—oil washing—Packing ,made by CNC machine
Inspection All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product enter into the market.

Three important aspects of the drive chain

One of the advantages of a drive chain is that it is relatively light. It sends nearly all of the engine’s power to the rear wheels, even if it loses some power along the way. Engine power on a dyno is different than on the road. Therefore, the chain is the most efficient way to transmit power to the rear wheel. Let’s look at three important aspects of the drive chain. Here are some facts about them.

roller chain drive

When choosing a roller chain drive, consider your application and how much horsepower your system requires. For applications requiring more horsepower, a multi-strand drive is an option. If your horsepower is limited, single-strand drives are a good choice. Otherwise, you may need to choose the smallest pitch chain. However, this may not always be possible. You should also consider sprocket size. In many cases, choosing a smaller chain pitch can increase the number of options.
While proper lubrication and maintenance can last a roller chain drive for years, regular inspections are essential to prolonging its life. After the drive has been operating for 100 hours, a thorough inspection every 500 hours is recommended. During this inspection, look for key elements such as 3% elongation and chain wear. If the chain is not preloaded, elongation will happen very quickly. In either case, the industry-recommended 3% elongation will be achieved faster.
chain

flat top chain

The flat-top chain system consists of hinge pins that support the chain to ensure efficient conveying. There are different types of hinge pins available, namely single and double. The single hinge pin is suitable for short chainplates and lightly loaded products. Dual hinge pins provide increased stability and load capacity. Flat top drive chains can be used in many different industries. In this article, we will learn about some important properties of flat-top chains.
Plastic flat top chains can transport medium to large workpiece pallets. They have a circular arc function that enables continuous drive combinations involving curved circular arcs. Plastic flat top chains are also recommended for workpiece pallets with PA wear pads. Steel flat-top chains can withstand surface loads up to 1.5 kg/cm, and HD profiles are suitable for steel chains. This chain is used in a variety of applications, including packaging machines.

mute chain

There are several types of mufflers that can silence your drive chain. One is the Ramsay silent chain, also known as the inverted tooth chain. These chains can be custom designed for specific needs. Exclusive Australian distributor of CZPT products that can help you find the most effective and affordable silent chain. In addition to silent chains, CZPT also manufactures sprockets and other hardware required for the drive.
Another type of mute chain is the CZPT chain. CZPT chains have involute teeth, while the ANSI standard specifies straight teeth. The advantage of silent chains is reduced noise and vibration output, and wider chains are more economical than multi-strand roller chains. The downside of silent chains is that they wear out quickly without lubrication.
The mute chain consists of two main parts, the pin and the plate. The pins are rotated in the same direction and positioned so that they can only engage the sprocket from one direction. Therefore, mute links are not recommended for reverse applications. To find out if your chain will work in reverse, consult the manufacturer’s catalog. CZPT chain.

conveyor chain

Drive chains and conveyor chains are essentially the same, but they are very different. The transmission chain is mainly used to transport heavy objects, and the conveyor chain is used to transport light objects. On the other hand, drive chains are usually driven by belts. Both types of chains can be used for the same purpose. This article will cover both types of chains. You can use them to convey various types of materials and products.
There are some differences between belts and chains, but both types can perform similar functions. The drive chain is used to drive the rollers, while the belt is used to move the object horizontally. The drive chain usually drives the rollers that move the conveyor belt. For a wide range of applications, conveyors and drive chains can be customized to meet specific needs. Here are some common uses of these two chains:
chain

time chain

Timing chains fail for two reasons: complete damage and fatigue. Fatigue occurs when a timing chain reaches its breaking strength, and eventually, failure occurs when a timing chain exceeds its design life and suffers mechanical damage. Most timing chain failures are a combination of mechanical failure and fatigue. Chain chatter, engine misfires, and VVT systems can accelerate chain fatigue. If these causes of premature timing chain failure are not addressed, the timing chain could be permanently damaged.
In the past, the timing chain was the only drive chain available. Timing belts are a quieter alternative, but they are prone to failure and damage to valves and the engine. In recent years, OEM manufacturers have begun to return to the OHC/DOHC drive chain of the timing chain. This type of drive chain has many advantages, including the ability to simulate knock sensor vibrations. Additionally, the chain has better NVH performance, making it the drive chain of choice for automakers.

Timing Chains in Internal Combustion Engines

Internal combustion engines use timing chains to control intake and exhaust valves. The chain turns the camshaft at the right time and coordinates the movement of the valves on the cylinder head. This in turn allows the engine to generate power. The timing chain also controls the position of the intake and exhaust valves, ensuring that fuel and exhaust gases are expelled at the correct time. Incorrect timing in the vehicle can lead to misfires and other problems.
Chain drives in internal combustion engines are a common feature of many modern cars. It transmits rotational force from the crankshaft to the camshaft, which in turn controls the opening and closing of valves. The chain is lubricated with oil to prevent wear. Therefore, timing chains are often used in high-capacity engines, including trucks and motorcycles. But they do have some drawbacks.
A weakened timing chain can cause the engine to misfire, causing it to skip gears and lose coordination. A clicking sound may also indicate a problem. If the chain is too loose, it can also cause the engine to stall. If the chain is too loose, metal chips will appear in the oil. A clicking sound may also be heard when the engine is running. If you hear the engine stalling, it’s likely that the timing chain is the culprit.

Silent chains in internal combustion engines

The pitch difference between the drive sprocket and the silent chain reduces resonance sound, meshing shock, and accelerated wear at the chain and sprocket interface. The difference in pitch between the drive sprocket and the silent chain determines the loudness of the sound, and the system described here helps reduce it. The present invention is suitable for power transmission in internal combustion engines.
The earliest designs for silent chains come from the 1500s when Leonardo da Vinci sketched them. The SS Britannia propels the boat across the Atlantic using huge silent chains. By the mid-19th century, silent chains were used in nearly all types of industrial applications and as timing chains for early automobile engines. Due to their durability, these chains are durable and have smooth action.
In order to understand the mechanism of frictional losses in chains, various parameters must be considered. Speed, pitch, temperature and tension are the main parameters affecting friction loss. This test uses two types of chains to compare the frictional behavior between these two components. The results show that a single chain with a high pitch can increase the friction torque of another chain with the same pitch. These results provide an important basis for understanding the role of friction torque in internal combustion engines.
chain

lifting chain

Lift chairs are designed to lift heavy objects and can be used with a variety of lifting equipment, including forklifts and cranes. Hoist chains are also used in warehouses and ports of all sizes and consist of a series of pins and plates that mesh with each other to move heavy loads. ​​​CZPT Chain manufactures high-precision lifting chains. Here are some of the benefits of hoist chains for drive chains.
Blade Chain: This type of drive chain has a patented U-profile that turns the flexible chain into a highly stable outer post during the push phase. This design is designed to minimize linkage tangling and provide better pressure transfer. These chains are used for cranes, anchors and straddle carriers. Blade chains are more durable than other types of drive chains and are especially useful in heavy duty applications.
The drive chain is also available in a variety of materials. For example, square link chains are commonly used in cranes and hoists. They are cheap to manufacture but more prone to overloading. Conveyor chains are specially designed for chain conveyor systems. It consists of a series of interconnected rectangular links. Oval links tend to kink and are usually only used at low speeds.

China High-Performance Roller Conveyor Chain Industrial Leaf Stainless/Carbon Steel Chain Transmission Chain Conveyor Motorcycle Timing     excavator chain bushChina High-Performance Roller Conveyor Chain Industrial Leaf Stainless/Carbon Steel Chain Transmission Chain Conveyor Motorcycle Timing     excavator chain bush
editor by czh 2022-12-20