ep

November 23, 2020

Nylon gear racks is used on sliding gate, There is certainly steel core within it. we exported to Europe in major amount.
There is steel core inside the nylon gear rack.You’ll find two products obtainable. There are four eye(4 bracket is light form) and six eyes(six brackets is heavy kind).Every piece of nylon gear rack with screw set
Manufacturer supplier exporter of gear rack
We exported gear rack in major amount to Europe, America, Australia, Brazil, South Africa, Russia and so forth. There is certainly regular gear rack accessible as well as unique gear rack as per your drawing or samples. Our gear racks created by CNC machines
There is certainly quite a few sizes of steel gears rack for sliding door also. M4 8?¨¢30, M4 9?¨¢30, M4 10?¨¢30, M4 11?¨¢30, M4 12?¨¢30, M4 20?¨¢20, M4 22?¨¢22, M6 30?¨¢30 and so on
For M4 8?¨¢30, M4 9?¨¢30, M4 10?¨¢30, M4 11?¨¢30, M4 12?¨¢30, 1M length have three bolt,nut, washer sets and every 4pcs or 6pcs packed into carton box then put into steel pallet. For M4 8?¨¢30, M4 9?¨¢30, M4 10?¨¢30, M4 11?¨¢30, M4 12?¨¢30, 2M length have four bolt,nut, washer sets.
We will also supply the sliding gate part such as sliding door pulley, wheel, roller and so on. Please kindly check and allow me know your detail request
If you want 2M or 3M, or any other length, we are able to generate as per your requests
The vast majority of our client will send us drawing and we will make as per your drawing or sample.
We make Module M1-M8 racks, CP and DP British conventional racks. The maximum length in the rack is two meters. Our merchandise are actually widely used in quite a few fields this kind of as automatic doors, window openers, engraving machines, lifters, escalators, automated warehousing, foods machinery, electrical power tools, machine equipment, precision transmission, and so on.

We exported gear rack in massive amount to Europe, America, Australia, Brazil, South Africa, Russia and so on. There exists regular gear rack accessible as well as special gear rack as per your drawing or samples. Our gear racks created by CNC machines.

Our gear racks are utilized for window machine, engraving machine, lift machine, opener rack, CNC machine, car, industrial utilization so on.
one) Our gear rack is made as per DIN standards by CNC machine
2) The pressure angle: 20??/14.5??
three) Module: M0.4-M36/DP1-DP25
four) The utmost length is usually 3500mm
five) The materials is usually Q235, C45, SS304, SS316L, aluminum, copper, nylon and so forth.
Our gear racks are employed for window machine, engraving machine, lift machine, opener rack, CNC machine, car, industrial usage so on.
Industrial Gear Rack
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

We can also provide Development lift gear rack,American standard gears racks,steel gear rack,helical gear rack,versatile gear racks,power steering rack,steering gear rack ,stainless steel gear rack ,round rack gear ,nylon gear rack ,spur gear rack ,boston gear rack ,audia gear rack ,gears racks ,rack and pinion gear
one. Rich market working experience given that 1988.
two. Broad organize merchandise line, including plastics sheet/rod/parts/accessories: MC NYLON, OIL NYLON, POM, UHMW-PE, PU, PETP, Computer, PTFE, PVDF, PPS, PEEK, PAI, PI, PBI ect.
three. Manufacture, design and processing support as per your demand
1. Very good Tensile power;
two. Substantial impact and notching effect power;
3. High heat deflection temperature ;
four. Substantial strength and stiffness;
5. Great glide and limp household characters;
six. Fantastic chemical stability towards natural solvents and fuels;
7. Resistant to thermal aging (applicable temperature amongst -50??C and 110??C;
eight. Size alternation by humidity absorption have to be regarded;

Shaft sleeve, bearing bush, lining, lining plate, gear;
Worm gear, roller copper guidebook rail, piston ring, seal ring, slide block;
Spheric bowl, impeller, blade, cam, nut, valve plate,
Pipe, stuffing box, rack, belt pulley, pump rotor, and so forth.rack pinion gear for elevator in stockoperator Steel and Nylon gear rack SPUR GEAR RACK AND PINION nylon gear rack iron gear rack We warmly welcome shoppers each at home and abroad to speak to us to negotiate company, exchange info and cooperate with us.

ep

November 17, 2020

Manufacturer supplier exporter of bush chains

We specializing while in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and even more.
Taper Lock Pulley V Belt Pulley
We offer large excellent Taper Lock Pulley V Belt Pulley in competitive cost
v pulley, v belt pulleys, taper lock pulley,v belt pulleys ,v pulley,v groove pulleys,v groove belt pulley,taper lock pulley,taper lock v belt pulleys,taper lock bushing pulley,taper lock pulleys/ taper bore pulley,large v belts pulley,double v belts pulley,cast iron v belt pulleys belt pulley,variable velocity v belt pulley,v belt pulley split pulley,cast iron v belts pulley
V-BELT PULLEY INTRODUCE:
V- belt pulley of various sorts ( in accordance with form and width of belts). The material utilised is cast iron EN-GJL-250 UNI EN 1561, and for only some styles it truly is steel C45 E UNI EN 10083-1. They’ve a smaller prebore that could be machined in line with customers?¡¥ needs. Also one of the most common types can be found also with taperlock bore.
V BELT PULLEY Specs
a) Vbelt pulley for taper bushing: SPZ, SPA, SPB, SPC
b) Adjustable velocity V-belt pulleys and variable velocity pulleys c) Flat belt pulleys and conveyor belt pulleys
?¡è AMERICAN Common:
a) Sheaves for taper bushing: 3V, 5V, 8V
b) Sheaves for QD bushings: 3V, 5V, 8V
c) Sheaves for split taper bushing: 3V, 5V, 8V
?¡è We will Offer THE RANG Dimension DIAMETER 62MM~2000MM
d) Sheaves for 3L, 4L or possibly a, and 5L or B belts: AK, AKH,2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK e) Adjustable sheaves: poly V-pulley, multi-pitch H, L, J, K and M
Top quality Timing Pulley Light Excess weight Industrial Nylon Plastic Pulley V Belt Pulley
one.Material: Aluminium alloy,Carton steel, Cast iron, Stainless steel timing belt pulleys
2.Surface treament: Anodizing, Blackening, Zinc Plating, Phosphatiing
three. Teeth Quantity from 9 to 216; O.D. from 10mm to 1000mm;
four. Timing belt pulleys MXL, XL, L, H and XH; T2.5, T5, T10, AT5,AT10; 3M,5M,8M and 14M S3M, S5M, S8M, 14MGT, 8MGT, RPP8M
five. Taper bush and polit bores
six. Timing pulley bar 3M,5M,8M,MXL,XL,L T2.five T5 T10 AT5 and AT10
one) Sound style and design, ideal for heavy lifting.
two) The bearing housing and steel tube are assembled and welded with a concentric automatic.
automobile
4) The bearing finish is constructed to be sure that the roller shaft and bearing may be firmly connected.
air compressors
six) Roller and supporting components/materials are manufactured to DIN/ AFNOR/ FEM/ ASTM/ CEMA standard.
belt conveyor drive drum pulley
About roller,we are able to make gravity conveyor roller,steel conveyor roller,driving roller,light middle duty conveyor roller,o-belt tapered sleeve roller,gravity tapered roller,polymer sprocket roller and so forth. More specifics, please speak to us.
Could be used for tractors
three) Cutting of your steel tube and bearing is carried out with the utilization of a digital automobile device/machine/equipment..
backyard cutter
5) Fabrication with the roller is effected by an automobile gadget and 100% examined for its concentricity.
welcome your inquiries
seven) The casing is produced with extremely composite, anti corrosive alloy.
one) European requirements :
a) V-belt pulley for taper bushing: SPZ, SPA, SPB, SPC; up to 10 grooves

b) Adjustable velocity V-belt pulleys and variable speed pulley

c) Flat belt pulleys and conveyor belt pulleys

2) American specifications:

a) Sheaves for taper bushing: 3V, 5V, 8V

b) Sheaves for QD bushings: 3V, 5V, 8V

c) Sheaves for split taper bushing: 3V, 5V, 8V

d) Sheaves for 3L, 4L or a, and 5L or B belts: AK, AKH, 2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK

e) Adjustable sheave: poly V-pulley, multi-pitch H, L, J, K and M
Why Select Us
1) Working experience in casting for above 15 years and served customers all close to the entire world.
two) Common materials in line with technical drawing
three)Stable quality
four) On-time delivery
five) Competitive price and very good support
6) Constructive client suggestions from domestic and global market
7) Worldwide advanced-level tools which include CNC, numerical lathes, furnance, welding
products, CMM and detect &testing gear we utilised to ensure our product?¡¥s top quality.
8) OEM support, your demand is our pursued.
9) ISO9001:2008 and TS16949 excellent control
10) Standard: ASTM BS DIN etc

China manufacturer Side Guide 3/4 Qlv616 Hv Rpv 6 Pitch 19.05 Steel Industrial Power Transmission Silent Chain

Product Description

 

 

Products Collection

 

 

 

 

Product Description

QLV silent chains are our top-of-the-line solution for your power transmission needs. These chains are designed to offer exceptional performance, efficiency, and noise reduction for machine running.
These chains are made from high-strength steel, with linked plates and pins that fit together tightly to minimise noise and vibration during operation. They can transfer power more effectively than other chains without sacrificing noise reduction

 

When you need a specific design, we can provide customised solutions based on what you need. Whether you require specific features, plans, materials, or specifications, our team can work to ensure you get a chain that fully meets your needs.
Are you looking for other chains? 
Leave your message below, and feel free to contact us!

FAQ

Question 1: Are you a Manufacturer or a Trading Company?
Answer:
We are a 100% chain manufacturer with 23 years of experience
Question 2: What should I provide to get a quotation?
Answer:
1. Type of the chain (with photos if available)
2. Pitch of the chain
3. Width of the chain
4. Length and quantity of the chain
5. Other specific requirements
Question 3: How long is your manufacturing and delivery time?
Answer: 
Products are usually finished in 2 weeks, depending on the type and quantity. Also, please get in touch with us to check the delivery time to your destination.
Question 4: How long is your guaranteed time?
Answer: 
We offer a three-year guarantee if you purchase chains and matched sprockets together.
If you need chains only, a one-year guarantee can also be confirmed.
Question 5: Trade terms and Payment terms?
Answer:
We accept EXW, FOB, DDU, Door to Door. Payment terms, such as T/T, L/C, and Western Union, are acceptable. We also provide the service of Online Trading in this B2B platform.

 

Company Profile

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment, Agricultural Machinery
Material: Carbon Steel
Samples:
US$ 100/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

What are the benefits of using a corrosion-resistant pitch chain in marine environments?

Using a corrosion-resistant pitch chain in marine environments offers several significant benefits due to the challenging and corrosive nature of the marine setting. Here are some advantages of utilizing corrosion-resistant pitch chains:

  • Enhanced Durability: Corrosion-resistant pitch chains are designed to withstand exposure to saltwater, moisture, and other corrosive elements commonly found in marine environments. Their construction materials and surface treatments provide enhanced durability, extending the chain’s service life even in harsh conditions.
  • Minimized Corrosion: The primary benefit of corrosion-resistant pitch chains is their ability to resist corrosion effectively. This minimizes the formation of rust and other corrosive byproducts that can weaken the chain and compromise its performance.
  • Low Maintenance: Due to their corrosion-resistant properties, these chains require less maintenance and replacement, reducing downtime and associated costs. Routine lubrication and inspection are typically sufficient to keep the chains operating optimally.
  • Reliable Performance: Corrosion-resistant pitch chains maintain their structural integrity, ensuring reliable performance even in harsh marine conditions. Their resistance to rust and corrosion prevents premature wear and elongation, maintaining the chain’s original pitch and reducing the risk of chain failure.
  • Cost-Effectiveness: While corrosion-resistant pitch chains may have a higher upfront cost compared to standard chains, their extended service life and reduced maintenance needs result in long-term cost savings, making them a cost-effective solution for marine applications.
  • Safe Operation: Using corrosion-resistant pitch chains enhances safety in marine environments. Corroded chains can lead to unexpected failures, posing safety risks to personnel and equipment. The reliability of corrosion-resistant chains reduces the likelihood of such incidents.
  • Environmentally Friendly: Corrosion-resistant pitch chains contribute to environmental sustainability in marine applications. They produce less waste due to reduced replacement frequency and generate fewer pollutants, helping to preserve the marine ecosystem.

Overall, the benefits of using corrosion-resistant pitch chains in marine environments extend beyond just their resistance to corrosion. They offer enhanced durability, reduced maintenance needs, improved safety, and cost-effectiveness, making them a valuable choice for various marine applications.

China manufacturer Side Guide 3/4 Qlv616 Hv Rpv 6 Pitch 19.05 Steel Industrial Power Transmission Silent Chain  China manufacturer Side Guide 3/4 Qlv616 Hv Rpv 6 Pitch 19.05 Steel Industrial Power Transmission Silent Chain
editor by CX 2024-04-13

China Hot selling Standard Stainless Steel Bush Self-Lubricating Medical Industrial Connecting Link Conveyor Lube Free Double Short Pitch Roller Chain

Product Description

Standard Stainless Steel Bush Self-Lubricating Medical Industrial Connecting Link Conveyor Lube Free Double Short Pitch Roller Chain

Roller chains are a type of chain that is commonly used in industrial and mechanical applications to transmit power between 2 rotating shafts. Roller chains consist of a series of cylindrical rollers that are held together by metal links, and are designed to engage with the teeth of a sprocket to transmit torque between the 2 shafts.

Roller chains are available in a wide range of sizes and configurations to meet the specific needs of different applications. They are typically designated by a pitch value, which refers to the distance between the centers of 2 adjacent rollers. Common pitch sizes for roller chains include 1/4″, 3/8″, 1/2″, and 5/8″, although other sizes are also available.

Depending on the specific application requirements, roller chains can be made from various materials, including steel, stainless steel, and plastic. They are often used in applications requiring high tensile strength and durability, such as in conveyor systems, agricultural machinery, and material handling equipment.

Proper maintenance and lubrication of roller chains is important to ensure their longevity and efficient operation. Regular inspection and cleaning can help prevent wear and tear on the chains and sprockets and reduce the risk of failure or downtime. The chain should be properly tensioned and aligned to prevent excessive wear and damage to the sprockets and shafts, and lubricated according to the manufacturer’s recommendations.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Iron
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain

bush chain

What are the future trends and advancements in bush chain technology?

The future of bush chain technology is driven by the continuous pursuit of improving performance, reliability, and efficiency. Here are some emerging trends and advancements in bush chain technology:

1. Advanced Materials: Manufacturers are exploring the use of advanced materials such as high-strength alloys, polymers, and composites to enhance the durability and load-carrying capacity of bush chains. These materials offer improved wear resistance, corrosion resistance, and reduced weight.

2. Enhanced Lubrication Systems: Lubrication plays a crucial role in the smooth operation of bush chains. Future advancements aim to develop more efficient lubrication systems that provide better coverage, reduce friction, and extend the chain’s service life. Self-lubricating bush chains are also being developed, eliminating the need for external lubrication.

3. Precision Manufacturing: Advancements in manufacturing technologies, such as computer numerical control (CNC) machining and additive manufacturing, enable the production of bush chains with higher precision and tighter tolerances. This results in improved chain performance, reduced noise, and smoother operation.

4. IoT Integration: The integration of Internet of Things (IoT) technology allows for real-time monitoring of bush chain performance and condition. IoT-enabled sensors can detect wear, fatigue, and other potential issues, enabling predictive maintenance and optimizing chain performance.

5. Intelligent Control Systems: The development of intelligent control systems enables better monitoring and control of bush chain operation. These systems can optimize chain speed, tension, and alignment, leading to improved efficiency and reduced energy consumption.

6. Sustainability and Environmental Considerations: Future advancements in bush chain technology focus on reducing environmental impact. This includes the development of eco-friendly materials, energy-efficient designs, and recyclable chain components.

7. Customization and Modular Design: The trend towards customization and modular design allows for greater flexibility in adapting bush chains to specific application requirements. Modular bush chain systems simplify installation, maintenance, and replacement, reducing downtime and improving overall system efficiency.

These trends and advancements in bush chain technology aim to address industry needs for higher performance, increased reliability, and reduced maintenance, paving the way for more efficient and sustainable industrial applications.

bush chain

Can a bush chain be used in vertical lifting applications?

Yes, bush chains can be used in vertical lifting applications. The design and construction of bush chains make them suitable for transmitting power and lifting heavy loads in a vertical direction. Bush chains are commonly used in various vertical lifting systems such as elevators, cranes, hoists, and material handling equipment.

When utilizing a bush chain for vertical lifting, several factors should be considered:

1. Load capacity: Determine the maximum load that the bush chain needs to support during the lifting operation. Select a bush chain with an appropriate load capacity to ensure it can handle the weight of the load.

2. Safety factors: Consider the safety requirements and regulations for vertical lifting applications. Ensure that the selected bush chain meets the necessary safety standards and has a sufficient factor of safety to handle the intended load.

3. Speed and acceleration: Evaluate the desired lifting speed and acceleration. Take into account the weight of the load, the distance to be lifted, and the required lifting time. Ensure that the bush chain is capable of safely lifting the load at the desired speed and acceleration.

4. Tensioning and alignment: Proper tensioning and alignment are crucial for the smooth and reliable operation of a bush chain in vertical lifting applications. Ensure that the bush chain is properly tensioned and aligned to prevent issues such as chain slack, skipping, or jamming.

5. Lubrication: Provide adequate lubrication to reduce friction and wear between the bush chain components. Lubrication helps to prolong the life of the chain and ensures smooth movement during the lifting operation. Select the appropriate lubrication method based on the application requirements and operating conditions.

It is important to consult the manufacturer’s guidelines and specifications when selecting and installing a bush chain for vertical lifting applications. Proper maintenance and regular inspections should also be conducted to ensure the safe and reliable operation of the bush chain in the vertical lifting system.

bush chain

What are the applications of bush chains in industrial settings?

Bush chains, also known as bush roller chains or bushing chains, have a wide range of applications in various industrial settings. Their versatility and durability make them suitable for demanding environments and heavy-duty applications. Here are some common industrial applications of bush chains:

1. Industrial Machinery: Bush chains are used in a wide range of industrial machinery, including conveyors, material handling equipment, packaging machines, printing presses, and textile machinery. They provide reliable power transmission and can handle high loads and continuous operation.

2. Agricultural Equipment: Bush chains are extensively used in agricultural machinery such as tractors, combines, harvesters, and irrigation systems. They facilitate the transfer of power from the engine to various agricultural implements and enable efficient operation in tough farming conditions.

3. Automotive Systems: Bush chains find applications in automotive systems such as timing drives, camshaft drives, and engine oil pumps. They ensure precise synchronization of engine components and reliable power transmission for efficient and smooth operation.

4. Material Handling: Bush chains are commonly used in material handling equipment like forklifts, hoists, and cranes. They enable the lifting and movement of heavy loads and ensure reliable power transmission in demanding industrial environments.

5. Mining and Construction: In the mining and construction industries, bush chains are employed in equipment such as excavators, bulldozers, crushers, and conveyor systems. They can withstand harsh conditions, high loads, and abrasive materials commonly encountered in these industries.

6. Power Transmission: Bush chains are utilized in power transmission systems where torque and speed need to be transferred from one component to another. They are commonly found in power plants, pulp and paper mills, steel mills, and other heavy industrial applications.

7. Food Processing: Bush chains designed for food-grade applications are used in the food processing industry. They comply with strict hygiene and sanitation standards and are resistant to corrosion, allowing for safe and efficient operation in food production lines.

Overall, bush chains play a vital role in numerous industrial applications, providing reliable and efficient power transmission, durability, and resistance to harsh operating conditions. Their adaptability and strength make them a preferred choice in various industrial sectors.

China Hot selling Standard Stainless Steel Bush Self-Lubricating Medical Industrial Connecting Link Conveyor Lube Free Double Short Pitch Roller Chain  China Hot selling Standard Stainless Steel Bush Self-Lubricating Medical Industrial Connecting Link Conveyor Lube Free Double Short Pitch Roller Chain
editor by CX 2024-04-13

China Professional Wholesale Stainless Steel Wire Mesh Belt Chain Conveyor Belt Chain for Frozen Food Machinery

Product Description

Stainless Steel Wire Mesh Belt / Chain Conveyor Belt

Product Description

Product Name Conveyor Belt 
Structure  Mesh-Blet
Certifications  ISO 9001: 2008, GB/T19001-2000IDT, Test Report
Work Temp  -40Celsius ~ 90Celsius
Material Feature  Heat Resistant
Material  Stainless Steel, SS304/SS201/carbon steel
Voltage  220V 380V
Surface Treatment  Galvanized, 3% chromium plate, manganese plated
Application  Frozen Food Machinery, Canned Food Machinery, Seafood Machinery, Powder Metallurgy Machinery
 Heat Treatment Machinery, Glass Machinery, Chemical Machinery, General Conveying Machinery, etc.

Products Details

Chain-Driven Metal Mesh Belts

Chain-driven metal mesh belts should be considered whenever timing, transfer, and/or positive belt drive are important … in cases such as travel-up inclines, under heavy loads, for long distances, through quenching liquids, cooking oils, or other slippery conditions.

Chain-driven belts are also the only belts that are self-supporting. They can provide efficient operation in applications where friction-driven belts would not be desirable. Any mesh can be used in a chain-driven construction, but the selection is made on the basis of what is needed to support the product.

Balanced weave should be given first consideration, as it is economical and appropriate for most conditions. Gratex weave provides a closer mesh, while a Duplex weave is a close mesh that also provides strength and a straight-through opening. A conventional weave provides unobstructed openings.

Typical Applications

In food processing, chain-driven belts are used in washing, drying, cooking, freezing, dewatering, and blanching operations. In other applications, metals, electronic parts, chemicals, ceramics, leather, lumber, textiles, rubber, and many other products are moved through a host of processes where the positive drive is needed.

Chain Selection

Chains are normally selected according to the strength and speed required. The most frequently used types of chain for metal mesh conveyors are roller chain, employed for most room-to-medium temperature applications, and pintle chain which is recommended for heavier loads and higher temperatures.

Due to the important and specialized nature of the applications requiring these products, each inquiry is reviewed thoroughly. Our goal is to supply the most suitable belt for your specific application. We strive to provide solutions for each situation, assuring value for our customers. Our engineers and technical support group are involved in every specialty belt inquiry and order.

Product Show

Advantage

More Products

DETAILS ABOUT CHINAMFG CHAIN 

Certifications

Exhibition

Workshop
Application

Packaging Details & Shipping

FAQ
      

1. Are you a manufacturer or trade Company?
We are a factory founded in 1997 with a trade team for international service.

2. What terms of payment do you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight

3. What is your lead time for your goods?
Normally 35 days after confirmed order. 30 days could be available in the low season for some items (during May to July), and 45 days during the new year and hot season ( Jan to March).

4. Samples
For customers who need sample confirmation before ordering, please bear in mind that the following policy will be adopted:
1) All samples are free of charge with a maximum value not exceeding USD 100.
2) The courier cost for the first-time sample sending will be charged by the consignee. We will send the samples with freight to be collected. So please inform your account with FedEx, UPS, DHL, or TNT so that we can proceed promptly.
3) The first-time courier cost will be totally deducted from the contract value of the trial cooperation. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: All Sizes
Material: Steel
Inside Material: Polyester
Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
Tensile Strength: Common
Structure: Mesh-Blet
Customization:
Available

|

Customized Request

How does a steel roller chain differ from other types of steel chains?

A steel roller chain is a specific type of steel chain that is commonly used in power transmission and conveying applications. It differs from other types of steel chains in its design and construction, which allows it to perform specific functions efficiently.

Key characteristics that distinguish a steel roller chain from other steel chains include:

  • Rollers: Steel roller chains have cylindrical rollers positioned between the inner and outer plates. These rollers allow the chain to roll smoothly over sprockets, reducing friction and wear during operation.
  • Precision Engineering: Roller chains are manufactured with precision engineering to ensure consistent pitch and roller diameter, which is crucial for smooth and reliable operation.
  • High Strength: Like other steel chains, roller chains are made from high-quality steel, providing excellent strength and durability, making them suitable for heavy-duty applications.
  • Power Transmission: Roller chains are primarily designed for power transmission applications, where they transfer mechanical power from one rotating shaft to another.
  • Conveying: Steel roller chains are also used in conveyor systems for material handling, especially in industries like agriculture, mining, and manufacturing.
  • Standardization: Roller chains follow industry standards, such as ANSI (American National Standards Institute) or ISO (International Organization for Standardization), ensuring interchangeability and easy replacement.

Other types of steel chains, such as leaf chains and welded steel chains, have different designs and uses. Leaf chains, for example, are suitable for lifting and load-supporting applications, while welded steel chains are commonly used in heavy-duty lifting and hoisting operations.

In summary, a steel roller chain stands out from other steel chains due to its roller design, precision engineering, and specific applications in power transmission and material handling. It is a versatile and widely used component in various industries, ensuring smooth and efficient mechanical power transfer and material transport.

China Professional Wholesale Stainless Steel Wire Mesh Belt Chain Conveyor Belt Chain for Frozen Food Machinery  China Professional Wholesale Stainless Steel Wire Mesh Belt Chain Conveyor Belt Chain for Frozen Food Machinery
editor by CX 2024-04-12

China high quality CZPT Wear Resistant Glf Bush Roller Chain for Tgsu Flat Scraper Conveyor

Product Description

 

Product Description

 

 

Conveyor Chains
Bush roller chain used in horizontal scraper conveyor

Chains adopt high quality medium-carbon alloy steel, chain plate material is 40Mn, pin and roller material is 40Cr. High quality material and good heat treatment guarantee excellent anti-shearing force and tensile strength during working and have good looking.
Model: GLR For TGSU arc scraper conveyor, install U type scrapper
 

 

Certifications

 

Packaging & Shipping

 

Company Profile

 

 

After Sales Service

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Alloy
Structure: Roller Chain
Surface Treatment: Heat Treament
Samples:
US$ 10/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

bush chain

What are the safety precautions when working with bush chains?

Working with bush chains requires adherence to certain safety precautions to ensure the well-being of operators and prevent accidents. Here are some important safety measures to consider:

1. Personal protective equipment (PPE): Operators should wear appropriate PPE, including safety glasses, gloves, and protective clothing, to protect themselves from potential hazards such as flying debris, pinching, or entanglement.

2. Training and knowledge: Operators should be properly trained in the operation and maintenance of bush chains. They should have a thorough understanding of the equipment, including its components, functions, and potential hazards. Training should cover safe operating procedures, including start-up, shutdown, and emergency procedures.

3. Lockout/tagout procedures: Before performing any maintenance or repair work on a bush chain, proper lockout/tagout procedures should be followed. This involves isolating the power source, de-energizing the equipment, and securing it with lockout devices or tags to prevent accidental startup.

4. Regular inspections: Regular inspections should be conducted to identify any signs of wear, damage, or misalignment in the bush chain. This includes checking for loose bolts, worn sprockets, damaged links, or any other issues that could compromise the chain’s integrity. Any identified problems should be promptly addressed to prevent further damage or accidents.

5. Proper lifting and handling: When handling bush chains, proper lifting techniques should be employed to prevent strain or injury. Chains should be lifted using appropriate lifting equipment, and operators should avoid placing themselves in a position where they could be caught between moving parts.

6. Clean and well-maintained work environment: The work area should be clean, well-lit, and free from clutter or obstructions. This ensures that operators have clear visibility and can safely access the bush chain without tripping or other hazards.

7. Follow manufacturer guidelines: It is important to follow the manufacturer’s guidelines and recommendations for the safe use, maintenance, and inspection of the specific bush chain being used. This includes following recommended lubrication practices, tensioning guidelines, and any other instructions provided by the manufacturer.

By adhering to these safety precautions, operators can mitigate potential risks associated with working with bush chains and ensure a safe working environment for themselves and others involved in the operation and maintenance of the equipment.

bush chain

What are the benefits of using a self-lubricating bush chain?

Using a self-lubricating bush chain offers several advantages in industrial applications:

1. Reduced maintenance: Self-lubricating bush chains are designed to minimize the need for manual lubrication. They incorporate special materials or coatings that provide built-in lubrication, reducing the frequency of lubrication maintenance tasks.

2. Increased operational efficiency: The self-lubricating feature ensures consistent and proper lubrication of the bush chain, which helps to reduce friction and wear. This results in improved efficiency and smoother operation of the chain, reducing energy consumption and increasing overall system performance.

3. Extended chain life: Proper lubrication is essential for preserving the integrity and longevity of a bush chain. Self-lubricating bush chains offer superior lubrication capabilities, reducing friction and wear on the chain components. This leads to longer chain life, reducing the frequency of chain replacement and associated downtime.

4. Contamination resistance: Self-lubricating bush chains often have enhanced resistance to contaminants such as dust, dirt, and moisture. The lubrication materials or coatings used in these chains help repel or resist the entry of contaminants, reducing the risk of chain malfunction or premature failure.

5. Cost savings: By eliminating or reducing the need for manual lubrication, self-lubricating bush chains can result in cost savings associated with labor, lubrication materials, and maintenance downtime. The extended chain life also contributes to cost savings by reducing the frequency of chain replacements.

6. Environmental friendliness: Self-lubricating bush chains often use lubrication materials that are environmentally friendly, such as dry film lubricants or solid lubricants. This reduces the potential for lubricant leakage or contamination of the surrounding environment.

Overall, the use of self-lubricating bush chains provides significant benefits in terms of reduced maintenance, improved efficiency, extended chain life, contamination resistance, cost savings, and environmental considerations. These advantages make self-lubricating bush chains a preferred choice in many industrial applications where reliable and low-maintenance chain operation is essential.

bush chain

Can a bush chain be used in high-speed applications?

Yes, bush chains can be used in high-speed applications, but there are certain considerations to keep in mind. While bush chains are known for their durability and strength, they may have limitations in terms of their maximum allowable speed due to factors such as centrifugal forces and dynamic loads.

The speed capability of a bush chain depends on several factors, including the chain design, material, lubrication, and operating conditions. It is important to select a bush chain that is specifically designed for high-speed applications and to follow the manufacturer’s recommendations regarding speed limits.

In high-speed applications, it is crucial to ensure proper chain tensioning and alignment to minimize vibration and reduce the risk of chain failure. Regular maintenance, including lubrication and inspection, is also essential to prevent premature wear and extend the service life of the chain.

Additionally, the selection of a suitable lubricant is important for high-speed bush chain applications. The lubricant should have excellent film strength and provide sufficient protection against wear and friction at high speeds. It is recommended to consult with the chain manufacturer or a lubrication specialist to determine the most suitable lubrication solution.

Overall, while bush chains can be used in high-speed applications, it is essential to consider the specific requirements and limitations of the application and to ensure proper maintenance and lubrication to achieve reliable and efficient operation.

China high quality CZPT Wear Resistant Glf Bush Roller Chain for Tgsu Flat Scraper Conveyor  China high quality CZPT Wear Resistant Glf Bush Roller Chain for Tgsu Flat Scraper Conveyor
editor by CX 2024-04-12

China Hot selling China Factory Price Alloy Steel Link Chain Made in China

Product Description

COMPANY INTRODUCTION:
LinYi YuanTong Hardware Rigging Co.,Ltd. was founded in Located in TaiPing Street,HeXihu (West Lake) Dis. District,LinYi City,ZheJiang Province.It covers an area of 10,000 square meters,there are more than 200 employees,the main prouducts of enterprises are ordinary chains,high stength chains,stainless steel chains,knit chains,animal chains,ect,there are more than 300 varieties of specifications.
Our company has passed the international quality management system certification, and has a strict quality management system.With first- class equipment,reliable quality assurance,products have been exported to the United States,Canada,Europe and more than 30 countries and regions,have a high reputation.
If you need more details or have any questions, please feel free to contact us, we are more than pleased to do any help. Thanks!!

We can offer u all kinds of link chain:

1)DIN5685A/C,DIN764,DIN763,DIN766,DIN5686 Link Chain

2)Ordinary Short,Medium Link Chain

3)Korean Standard Link Chain

4)ASTM80 Standard Link Chain

5)Norwegian Standard Link Chai
6)Australian Standard Link Chain

7)NACM1990 Standard Link Chain

8)NACM1996/2003 Standard Link Chain

9)Animal Link Chain

10)Stainless Steel Link Chain

11)Weldless Link Chain

12)G80 Link Chain

13)G43 Link Chain

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain, Link Chiain
Material: Alloy
Surface Treatment: Electroplating
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Welded Chain
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

What are the advantages of using a steel chain in industrial settings?

A steel chain offers numerous advantages in industrial settings, making it a popular choice for various applications. Some of the key advantages include:

  • Strength and Durability: Steel chains are known for their high strength and durability, making them suitable for heavy-duty applications in industrial environments. They can withstand significant loads and resist wear and tear, ensuring a long service life.
  • Wide Range of Sizes and Configurations: Steel chains are available in a wide range of sizes and configurations to suit different industrial applications. This versatility allows for customization and selection of the right chain for specific needs.
  • High Temperature Resistance: Steel chains can perform reliably in high-temperature environments, making them suitable for applications involving heat and extreme conditions.
  • Corrosion Resistance: Stainless steel chains, in particular, offer excellent corrosion resistance, making them ideal for use in industries where exposure to moisture or chemicals is common.
  • Power Transmission: Steel chains are widely used for power transmission in industrial machinery and equipment. They efficiently transfer mechanical power from one shaft to another, providing a reliable means of motion and operation.
  • Material Handling: Steel chains are essential components in conveyor systems used for material handling and transportation in industries like mining, agriculture, and manufacturing.
  • Cost-Effective: Steel chains are cost-effective solutions for industrial applications due to their long-lasting performance and low maintenance requirements.
  • Interchangeability: Standardized steel chains, such as those following ANSI or ISO standards, are interchangeable, simplifying replacement and reducing downtime.
  • Low Friction: Steel chains with appropriate lubrication can operate with low friction, minimizing energy losses and enhancing efficiency.
  • Reliability: Steel chains have a proven track record of reliability in various industrial processes, contributing to the overall efficiency and productivity of operations.

In summary, steel chains are preferred in industrial settings due to their strength, durability, temperature resistance, and versatility. They play critical roles in power transmission, material handling, and various other applications, ensuring smooth and efficient operations in diverse industries.

China Hot selling China Factory Price Alloy Steel Link Chain Made in China  China Hot selling China Factory Price Alloy Steel Link Chain Made in China
editor by CX 2024-04-11

China wholesaler Martin General Hardware 40b-2 B Series Short Pitch Precision Duplex Carbon Steel Roller Chains and Bush Chains for Coal Machine

Product Description

B Series Short pitch Precision Duplex Roller Chains & Bush Chains

ISO/DIN
Chain No.
Pitch

P
mm

Roller diameter

d1max
mm

Width
between inner plates
b1min
mm
Pin diameter

d2 max
mm

Pin length Inner
plate depth
h2max
mm
Plate thickness

t/Tmax
mm

Transverse pitch

         Pt         mm

Tensile strength

Qmin
kN/lbf

Average
tensile strength

Q0
kN

Weight
per meter
q  kg/m
Lmax
mm
Lcmax
mm
40B-2 63.500 39.37 38.10 22.89 154.5 161.5 52.96 8.50/8.0 72.29 630.0/143182 711.9 32.00

*Straight side plates

 

ROLLER CHAIN

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.

CONSTRUCTION OF THE CHAIN

Two different sizes of roller chain, showing construction.
There are 2 types of links alternating in the bush roller chain. The first type is inner links, having 2 inner plates held together by 2 sleeves or bushings CHINAMFG which rotate 2 rollers. Inner links alternate with the second type, the outer links, consisting of 2 outer plates held together by pins passing through the bushings of the inner links. The “bushingless” roller chain is similar in operation though not in construction; instead of separate bushings or sleeves holding the inner plates together, the plate has a tube stamped into it protruding from the hole which serves the same purpose. This has the advantage of removing 1 step in assembly of the chain.

The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. The original power transmission chain varieties lacked rollers and bushings, with both the inner and outer plates held by pins which directly contacted the sprocket teeth; however this configuration exhibited extremely rapid wear of both the sprocket teeth, and the plates where they pivoted on the pins. This problem was partially solved by the development of bushed chains, with the pins holding the outer plates passing through bushings or sleeves connecting the inner plates. This distributed the wear over a greater area; however the teeth of the sprockets still wore more rapidly than is desirable, from the sliding friction against the bushings. The addition of rollers surrounding the bushing sleeves of the chain and provided rolling contact with the teeth of the sprockets resulting in excellent resistance to wear of both sprockets and chain as well. There is even very low friction, as long as the chain is sufficiently lubricated. Continuous, clean, lubrication of roller chains is of primary importance for efficient operation as well as correct tensioning.

LUBRICATION

Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]

There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.

Many oil-based lubricants attract dirt and other particles, eventually forming an CHINAMFG paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.

VARIANTS DESIGN

Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.

Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.

Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.

USE

An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CHINAMFG the bar.

Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CHINAMFG flight, a system known as Thrust vectoring.

WEAR

 

The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).

With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.

The lengthening due to wear of a chain is calculated by the following formula:

M = the length of a number of links measured

S = the number of links measured

P = Pitch

In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.

CHAIN STRENGTH

The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.

The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.

CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Food and Beverage Industry, Motorcycle Parts
Surface Treatment: Polishing
Structure: Roller Chain
Material: Alloy
Type: Short Pitch Chain
Samples:
US$ 0/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bush chain

What are the future trends and advancements in bush chain technology?

The future of bush chain technology is driven by the continuous pursuit of improving performance, reliability, and efficiency. Here are some emerging trends and advancements in bush chain technology:

1. Advanced Materials: Manufacturers are exploring the use of advanced materials such as high-strength alloys, polymers, and composites to enhance the durability and load-carrying capacity of bush chains. These materials offer improved wear resistance, corrosion resistance, and reduced weight.

2. Enhanced Lubrication Systems: Lubrication plays a crucial role in the smooth operation of bush chains. Future advancements aim to develop more efficient lubrication systems that provide better coverage, reduce friction, and extend the chain’s service life. Self-lubricating bush chains are also being developed, eliminating the need for external lubrication.

3. Precision Manufacturing: Advancements in manufacturing technologies, such as computer numerical control (CNC) machining and additive manufacturing, enable the production of bush chains with higher precision and tighter tolerances. This results in improved chain performance, reduced noise, and smoother operation.

4. IoT Integration: The integration of Internet of Things (IoT) technology allows for real-time monitoring of bush chain performance and condition. IoT-enabled sensors can detect wear, fatigue, and other potential issues, enabling predictive maintenance and optimizing chain performance.

5. Intelligent Control Systems: The development of intelligent control systems enables better monitoring and control of bush chain operation. These systems can optimize chain speed, tension, and alignment, leading to improved efficiency and reduced energy consumption.

6. Sustainability and Environmental Considerations: Future advancements in bush chain technology focus on reducing environmental impact. This includes the development of eco-friendly materials, energy-efficient designs, and recyclable chain components.

7. Customization and Modular Design: The trend towards customization and modular design allows for greater flexibility in adapting bush chains to specific application requirements. Modular bush chain systems simplify installation, maintenance, and replacement, reducing downtime and improving overall system efficiency.

These trends and advancements in bush chain technology aim to address industry needs for higher performance, increased reliability, and reduced maintenance, paving the way for more efficient and sustainable industrial applications.

bush chain

How does a bush chain handle different speeds and loads?

Bush chains are designed to handle various speeds and loads in industrial applications. Here’s how they accommodate different operating conditions:

1. Speed: Bush chains are engineered to operate effectively at different speeds, ranging from low-speed to high-speed applications. The design and materials used in the chain construction ensure smooth and reliable performance even at high rotational speeds. The chain’s pitch, diameter, and strength are factors considered during the selection process to match the required speed.

2. Load capacity: Bush chains are designed to withstand different load capacities, including both static and dynamic loads. The chain’s strength, determined by factors such as the material used, chain size, and construction, is critical in handling different loads. The appropriate chain size and strength must be selected to ensure that the chain can safely and reliably transmit the required loads without deformation or failure.

3. Lubrication: Proper lubrication is essential for the smooth operation of a bush chain under varying speeds and loads. Lubrication reduces friction and wear between the chain components, allowing the chain to operate efficiently. Depending on the application, lubrication can be achieved through various methods, including manual lubrication, automatic lubrication systems, or self-lubricating bush chains.

4. Material selection: The choice of materials for the bush chain components plays a crucial role in handling different speeds and loads. High-strength materials, such as hardened steel or alloys, are commonly used for the chain plates, pins, and bushings to ensure the necessary strength and durability. Additionally, specialized coatings or surface treatments may be applied to enhance wear resistance and reduce friction.

5. Design considerations: The design of the bush chain, including factors such as the number of links, link shape, and articulation, is optimized to distribute the load evenly and promote smooth engagement with the sprockets. These design elements help minimize stress concentration points and ensure efficient power transmission.

By considering factors such as speed, load capacity, lubrication, material selection, and design, bush chains are able to handle a wide range of operating conditions. Proper selection and maintenance of the bush chain are essential to ensure optimal performance, longevity, and safety in various industrial applications.

bush chain

What are the applications of bush chains in industrial settings?

Bush chains, also known as bush roller chains or bushing chains, have a wide range of applications in various industrial settings. Their versatility and durability make them suitable for demanding environments and heavy-duty applications. Here are some common industrial applications of bush chains:

1. Industrial Machinery: Bush chains are used in a wide range of industrial machinery, including conveyors, material handling equipment, packaging machines, printing presses, and textile machinery. They provide reliable power transmission and can handle high loads and continuous operation.

2. Agricultural Equipment: Bush chains are extensively used in agricultural machinery such as tractors, combines, harvesters, and irrigation systems. They facilitate the transfer of power from the engine to various agricultural implements and enable efficient operation in tough farming conditions.

3. Automotive Systems: Bush chains find applications in automotive systems such as timing drives, camshaft drives, and engine oil pumps. They ensure precise synchronization of engine components and reliable power transmission for efficient and smooth operation.

4. Material Handling: Bush chains are commonly used in material handling equipment like forklifts, hoists, and cranes. They enable the lifting and movement of heavy loads and ensure reliable power transmission in demanding industrial environments.

5. Mining and Construction: In the mining and construction industries, bush chains are employed in equipment such as excavators, bulldozers, crushers, and conveyor systems. They can withstand harsh conditions, high loads, and abrasive materials commonly encountered in these industries.

6. Power Transmission: Bush chains are utilized in power transmission systems where torque and speed need to be transferred from one component to another. They are commonly found in power plants, pulp and paper mills, steel mills, and other heavy industrial applications.

7. Food Processing: Bush chains designed for food-grade applications are used in the food processing industry. They comply with strict hygiene and sanitation standards and are resistant to corrosion, allowing for safe and efficient operation in food production lines.

Overall, bush chains play a vital role in numerous industrial applications, providing reliable and efficient power transmission, durability, and resistance to harsh operating conditions. Their adaptability and strength make them a preferred choice in various industrial sectors.

China wholesaler Martin General Hardware 40b-2 B Series Short Pitch Precision Duplex Carbon Steel Roller Chains and Bush Chains for Coal Machine  China wholesaler Martin General Hardware 40b-2 B Series Short Pitch Precision Duplex Carbon Steel Roller Chains and Bush Chains for Coal Machine
editor by CX 2024-04-11

China supplier Stainless Steel 304/316 Link Chain (Short /Long /Medium Link Chain)

Product Description

Link Chain

DIN763, DIN766, Norwegian standard link chain,Korean standard link chain, us type standard double loop chain,

DIN5686 knotted chain,Japanese standard, Korean standard link chain, ASTM80 standard link chain, and so on.

We have in this line for many years. We sincerely hope to establish long and stable business cooperations

with your company.We confirm you good quality, best price, best service and punctual delivery time.

If you have any inquirys in our line, please feel free to contact us.We will try all our best to support you.

 

Our Main Products

>>>FAQ:
 

1. Can I be your agent?
Yes, welcome to deep cooperation. We have big promotion of CHINAMFG brand in the market now. For the details please contact me.

2. Is OEM available?
Yes, OEM is available. We have professional designer to help your brand promotion.
3. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Free for the samples, but you need to pay for the freight.
4. What’s your quality guarantee?
We have different kinds of products which can meet different quality standard.
Our QC department will teset products before shipping. We have 100% quality guarantee to customers. We will be responsible for any quality problem.
5. How about the delivery time?
The delivery time is depend on the products and the quantity. But generally, the delivery time for a container is about 1 month.
6. What’s benefit will you bring?
Your client satisfied on the quality.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain, Lifting Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 3mm-25mm
Structure: Welded Chain
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

What are the benefits of using a stainless steel chain in certain environments?

Stainless steel chains offer several benefits in specific environments due to their unique properties and characteristics:

  • Corrosion Resistance: One of the most significant advantages of stainless steel chains is their excellent resistance to corrosion. They can withstand exposure to moisture, water, and various chemicals, making them ideal for outdoor and marine applications, as well as in industries where the equipment is frequently cleaned or exposed to harsh substances.
  • High Strength: Stainless steel chains are known for their high tensile strength, which allows them to handle heavy loads and endure tough operating conditions. They are commonly used in applications where standard carbon steel chains may not provide sufficient strength.
  • Temperature Resistance: Stainless steel chains can maintain their mechanical properties and integrity over a wide range of temperatures, making them suitable for both high-temperature and low-temperature environments. They are often used in applications where extreme heat or cold is a factor.
  • Hygienic and Clean: In industries such as food processing, pharmaceuticals, and healthcare, cleanliness is crucial. Stainless steel chains have a smooth surface that is easy to clean and maintain, making them a hygienic choice for these applications.
  • Aesthetic Appeal: Stainless steel chains have an attractive and polished appearance, making them suitable for applications where aesthetics are important, such as in architectural designs and decorative installations.
  • Low Maintenance: Due to their corrosion resistance, stainless steel chains require less maintenance compared to other materials. They are less prone to rust and wear, reducing the need for frequent replacements or repairs.

While stainless steel chains offer numerous benefits, they can be more expensive than other types of chains. However, their long lifespan, resistance to corrosion, and low maintenance needs often make them a cost-effective choice in the long run, especially in harsh or demanding environments.

In summary, stainless steel chains are highly advantageous in specific environments where corrosion resistance, strength, temperature resistance, hygiene, and aesthetics are essential considerations. Their versatility and durability make them suitable for a wide range of applications across various industries.

China supplier Stainless Steel 304/316 Link Chain (Short /Long /Medium Link Chain)  China supplier Stainless Steel 304/316 Link Chain (Short /Long /Medium Link Chain)
editor by CX 2024-04-10

China Hot selling Abrasion Resistant Bush Roller Chain with Long Service Life

Product Description

 

Product Description

 

 

Conveyor Chains
Bush roller chain used in horizontal scraper conveyor

Chains adopt high quality medium-carbon alloy steel, chain plate material is 40Mn, pin and roller material is 40Cr. High quality material and good heat treatment guarantee excellent anti-shearing force and tensile strength during working and have good looking.
Model: GLR For TGSU arc scraper conveyor, install U type scrapper
 

 

Certifications

 

Packaging & Shipping

 

Company Profile

 

 

After Sales Service

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Alloy
Structure: Roller Chain
Surface Treatment: Heat Treament
Samples:
US$ 10/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

bush chain

Can a bush chain be used in food processing industries?

Yes, bush chains can be used in food processing industries, provided that they meet certain criteria to ensure food safety and hygiene. When selecting a bush chain for food processing applications, several factors should be considered:

1. Material compatibility: The chain material should be food-grade and suitable for contact with food products. Stainless steel, particularly austenitic stainless steel grades like 304 and 316, is commonly used due to its corrosion resistance, durability, and ease of cleaning. These materials are non-toxic and do not contaminate the food.

2. Lubrication: In food processing applications, it is important to consider the lubrication requirements. Some bush chains are available with self-lubricating properties or require food-grade lubricants that are safe for incidental contact with food. This ensures that the lubrication used does not pose a risk of contamination.

3. Cleanability: The bush chain should be designed in a way that allows for easy cleaning and maintenance. Smooth surfaces, without crevices or hard-to-reach areas, are preferred to prevent the accumulation of food particles, bacteria, or other contaminants. The chain should also withstand frequent cleaning processes, including washdowns with cleaning solutions or high-pressure water.

4. FDA and regulatory compliance: It is important to ensure that the bush chain and associated components comply with relevant food safety regulations, such as those set by the FDA (Food and Drug Administration) in the United States or similar regulatory bodies in other countries. Compliance with these regulations helps to maintain food safety standards.

5. Sanitary design: The bush chain should adhere to sanitary design principles, which include features such as smooth surfaces, no exposed threads, and easy disassembly for cleaning. This helps prevent the growth of bacteria and ensures the chain can be effectively sanitized.

By considering these factors and selecting a bush chain that meets the specific requirements of the food processing industry, it is possible to use bush chains safely and effectively in various applications, including conveying, sorting, packaging, and processing of food products.

bush chain

How does a bush chain contribute to overall system efficiency?

A bush chain contributes to overall system efficiency in several ways:

1. Power transmission: Bush chains are designed to efficiently transmit power from the driving source to the driven machinery or equipment. They have high tensile strength and can effectively transfer rotational motion, allowing for the efficient transfer of power from the motor or engine to the intended application.

2. Load-bearing capacity: Bush chains are capable of handling heavy loads and are designed to withstand the stresses associated with transmitting power in industrial applications. By efficiently transferring the load, they minimize power losses and reduce the need for additional components or systems.

3. Smooth and reliable operation: Bush chains are constructed with precision-engineered components that work together to provide smooth and reliable operation. They have low friction between the bushings and pins, reducing energy losses and minimizing wear and tear. This results in improved overall system efficiency.

4. Minimal maintenance requirements: Bush chains are designed to operate with minimal maintenance. They have self-lubricating capabilities, reducing the need for frequent lubrication. This not only saves time and resources but also ensures consistent performance and extends the chain’s lifespan.

5. Flexibility and adaptability: Bush chains can be customized and adapted to suit specific application requirements. They are available in various sizes, pitches, and configurations, allowing for easy integration into different systems. This flexibility enhances system efficiency by providing the optimal chain solution for the specific application.

Overall, a properly selected and maintained bush chain contributes to the overall efficiency of a system by minimizing power losses, reducing wear and tear, and providing reliable and smooth operation. It ensures effective power transmission and load-bearing capacity, resulting in improved productivity and reduced downtime.

bush chain

Can a bush chain be used in high-load applications?

Yes, bush chains are commonly used in high-load applications due to their robust design and ability to handle heavy loads. The construction of a bush chain allows it to transmit significant amounts of force and torque, making it suitable for demanding industrial applications.

Bush chains are designed with solid bushings and precision rollers that provide excellent load-carrying capacity. The bushings act as a bearing surface between the pins and the rollers, reducing friction and allowing for smooth rotation under high loads.

Furthermore, bush chains are available in various sizes and configurations to accommodate different load requirements. They are made from durable materials such as alloy steel or stainless steel, which further enhances their strength and load-bearing capabilities.

When selecting a bush chain for a high-load application, it is important to consider factors such as the anticipated load magnitude, operating conditions, and the desired safety margin. Proper lubrication and regular maintenance are also essential to ensure optimal performance and extend the service life of the bush chain in high-load applications.

Overall, bush chains are a reliable choice for transmitting high loads and are widely used in industries such as mining, construction, heavy machinery, and material handling.

China Hot selling Abrasion Resistant Bush Roller Chain with Long Service Life  China Hot selling Abrasion Resistant Bush Roller Chain with Long Service Life
editor by CX 2024-04-10

China Custom Tianjin OEM Factory High Strength Stainless Steel 304 316 06A 08A 10A 12A 16A Wheel Roller Chain

Product Description

Product Description

HRSY Roller Chain Profile

Standard:

ANSI, DIN, ISO

Type:        

Drive chains, Conveyor chains, Engineering chains, Agricultural chains, Traction chains, Escalator chains

Drive chain

Short pitch precision roller chain (A series, B series, Hevey duty series roller chain) 

High strength short pitch roller chains
Corrosion resistant short pitch roller chain

Self-lubrication roller chain

O-Ring chains

Oil filed chains

Heavy duty cranked-link transmission chains

Double pitch transmission chains

Inverted tooth chains

Motorcycle chains

Other (Driver chains)

Conveyor chains

Conveying roller chains

Rubber attached plate chains

Printing iron drying room line chains

Double hinged conveyor chains

Metric (M type) conveyor chains

FV series conveyor chains

Wooden conveyor chains

Chains for food packaging machinery

Conveyor chains for paper roll

Engineering chains

Conveying chains for cement industry

Scraper conveyor chains

Conveyor chains for coal washer

Rubber gloves carrier chains

Steel sleeve chain for engineering

Welded-steel-type mill chains

Sugar machine chains

Conveyor chains for steel mill

Agricultural chains

Agricultural machinery drive chains

Steel pintle chains 

ZGS38 combine harvester chains

Rice harvester chains

S type C type
Steel roller chains

Others

Traction chains

Plate chains

Leaf chains for sky stacker

Traction chains

Others

Escalator chains

Escalator step chains

Escalator driver chains

Material

40Mn, 45Mn, SS316, SS304, SS201

Advantage

We have competitive price and high quality.

Our stock standard length: 5ft each piece, 10ft each piece.

Custom length: We can custom according to your demand.

We can accept your Logo, accept ODM, OEM.

 

Detailed Photos

Packaging & Shipping

Company Profile

ZheJiang Haorongshengye Electrical Equipment Co., Ltd.

1. Was founded in 2008
2. Our Principle:

“Credibility Supremacy, and Customer First”
3. Our Promise:

“High quality products, and Excellent Service”
4. Our Value:

“Being Honesty, Doing the Best, and Long-lasting Development”
5. Our Aim:

“Develop to be a leader in the power transmission parts industry in the world”
 

6.Our services:

1).Competitive price

2).High quality products

3).OEM service or can customized according to your drawings

4).Reply your inquiry in 24 hours

5).Professional technical team 24 hours online service

6).Provide sample service

Main products

Machines

Exbihition

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
Surface Treatment: Oil Blooming
Samples:
US$ 50/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

Can steel chains be used in the automotive and transportation sectors?

Yes, steel chains are extensively used in the automotive and transportation sectors for various applications. Some of the key uses of steel chains in these industries include:

  • Engine Timing Systems: Steel chains are commonly used in engine timing systems to synchronize the movement of engine components, ensuring precise and efficient engine operation.
  • Transmission Components: Steel chains are utilized in automotive transmissions to transfer power from the engine to the wheels, allowing for smooth gear changes and power distribution.
  • Powertrain Applications: Steel chains are employed in powertrain systems to drive various components and transfer power throughout the vehicle.
  • Commercial Vehicles: Steel chains are used in commercial vehicles, such as trucks and buses, for applications like powering the wheels and other vehicle systems.
  • Motorcycles: In motorcycles, steel chains are commonly used to transfer power from the engine to the rear wheel.
  • Transportation Equipment: Steel chains are utilized in transportation equipment, such as conveyor systems and material handling in warehouses and distribution centers.
  • Rail Transport: Steel chains find use in rail transport for various applications, including coupling and towing.

Due to their strength, durability, and ability to handle heavy loads, steel chains are preferred in the automotive and transportation sectors, where reliability and safety are critical. They play a vital role in ensuring smooth and efficient operation in a wide range of automotive and transportation equipment.

China Custom Tianjin OEM Factory High Strength Stainless Steel 304 316 06A 08A 10A 12A 16A Wheel Roller Chain  China Custom Tianjin OEM Factory High Strength Stainless Steel 304 316 06A 08A 10A 12A 16A Wheel Roller Chain
editor by CX 2024-04-09

China high quality Conveyor Slat Chains Bush Roller Chain Used in Horizontal Scraper Conveyor

Product Description

ZheJiang CHINAMFG Conveying Equipment Co.,Ltd

Product Description

 

Bush roller chain(used in horizontal scraper conveyor)

1.Chains adopt high quality medium-carbon alloy steel, chain plate material is 40Mn, pin and roller material is 40Cr. High quality material and good heat treatment guarantee excellent anti-shearing force and tensile strength during working and have good looking.

2.Model: GLF For TGSS flat scraper conveyor, install flat scrapper
General & Dimension(Material: Carbon Steel, Stainless Steel)

Type
 
Pitch
P
mm
 
between
inner plates
b1
mm
 
Bush
Diameter
d
mm
 
Pin
Diameter
d1
mm
 
Bush
Diameter d2
mm
 
Plate
Width
H
mm
 
Plate 
Thickness 
T
mm
 
Flight Attachment (mm) Rated
Strength
KN
 
Width
L
Distance
L1
Distance
L2
diameter
D 
GLF66.5(5-6)D

 

66.5

 

26.5

 

22.23

 

12.7

 

16.23

 

30

 

5/6

 

160 102 / 2-Φ9X14 140

 

230 95 195 4-Φ9X14
 
270 102 228
GLF66.675(5-6)D

 

66.675

 

26.5

 

22.23

 

12.7

 

16.23

 

30

 

5/6

 

182 90 150 4-Φ9X14

 

140

 

215 95 195
295 95 195
GLF100(6)

 

100

 

38.5

 

36.0

 

16.0

 

21.6

 

40

 

6

 

170 115   2-Φ9X14 180

 

225 95 195 4-Φ9X14

 

294 115 245
370 155 255
GLF125(6)D
 
125
 
32.5
 
25.0
 
18.0
 
20.00
 
50
 
6
 
300 115 245 4-Φ9X14
 
200
 
370 130 330
GLF160(8)D×385 160 36.5 36.0 17.8 24.50 50 8 385 130 330 4-Φ11X15 220
GLF200(8)D×467 200 42.5 40.0 20.0 30.00 60 8 467 160 420 4-Φ13X17 250
81X 66.27

 

26.99

 

23.02

 

11.1

 

16.23

 

28.6 4 Welding attached plate, length and hole size customized
Wood transport chain according to customer requirements

 

107
81XH 31.4
 
 6/8 152
81XHH 8 191

NOTE: Other specifications which are not listed above can be made to customers’ specifications.

Bush roller chain(used in U type scraper conveyor
Model: GLR For TGSU arc scraper conveyor, install U type scrapper

General & Dimension(Material: Carbon Steel, Stainless Steel)

Type Pitch
P
mm
between
inner plates
b1 mm
Bush
Diameter
mm
Pin
Diameter
d1 mm
Bush
Diameter
d2 mm
Plate
Width
mm
Plate 
Thickness 
mm
Flight Attachment (mm) Rated
Strength
KN
Width
mm
Distance
L1mm
Distance
L2mm
diameter
mm
GLR68(5) 68 25.3 22.23 11.1 16.23 29 5   102 32 4-Φ9 140
GLR60(6)D 60 26.0 22.23 12.7   30 6 130 100 32 4-Φ9 140
GLR66.5(6)D 66.5 26.5 22.23 12.7 16.23 30 6 130 102 32 4-Φ9 140
GLR80(6)D 80 32.0 28.00 18.0   42 6 160 120 32 4-Φ9 140
GLR100(6)D 100 38.5 36.00 16.0 21.6 40 6 130 102 32 4-Φ9 180

Ring Chain 

DRAG CONVEYOR
Type
Ring
Chain
Type
Pitch
P(mm)
Diameter
d(mm)
length
L1(mm)
Width
W(mm)
Flight
Type
Wing Width
L(mm)
Flight
Width
H(mm)
GSS16 D10-55-13 55 10 74 32.5 HF16 148 43.5
GSS20 D10-55-13 55 10 74 32.5 HF20 188 43.5
GSS25 D10-55-13 55 10 74 32.5 HF25 225 43.5
GSS32 D14-70-18 70 14 95 45 HF32 300 54.5
GSS40 D14-70-18 70 14 95 45 HF40 382 54.5

Offset Sidebar Chain

Type Pitch
P
mm
Bush
Diameter
d1
Pin
Diameter
d
Plate
Width
H
Width between
plates at inner ends
b1
Width between
plates at outer ends
b2
Plate 
Thickness 
T1
Rated
Strength
KN
Wing Plate 
Thickness
T2
Wing Width
mm
WH78 66.27 22.23 12.7 28.4 28.4 51 6.4 93.4 Welding attached plate, length and hole size customized
WH82 78.1 27 14.29 32 44 57 6.4 132
WH124 101.6 36.5 19.05 38.1 41.3 70 9.5 300
WH132 153.67 44.45 25.25 50.8 77.1 111.76 12.7 378
WH150 153.67 44.45 25.25 63.5 77.1 111.76 12.7 398
WH155 153.67 44.45 28.42 63.5 73.6 111.25 14.27 411
WH157 153.67 44.45 28.42 63.5 76.4 117.35 15.88 552

Forged Chain

Pitch
P(mm)
Pin Diameter
d(mm)
Plate Width
 H(mm)
b1
(mm)
b2
(mm)
b3
(mm)
T1
(mm)
T2
(mm)
Wing Width
L(mm)
Rated
Strength
100 14 30 15 33 16 13 6(8) Welding attached plate, length and hole size customized 140KN
125 17 35 17 34 18 8 6(8) 150KN
142 25.4 50.8 19 43 20 12.2 8(10) 270KN
142(H) 25.4 50.8 29 62 30 15 8(10) 340KN
150 18 40 18 40 20 11.5 6(8.10) 200KN
200 21 45 20 42 22 12.2 6(8.10) 270KN

Company Profile

ZheJiang CHINAMFG CONVEYING EQUIPMENT CO. LTD., Established in 2011, specializing in bucket elevator, conveyor parts manufacturing, in recent years, more than 10 research and development of food conveying accessories obtained national invention and edible new patents.
Our factory is located in Daoshu Industrial Park, HangZhou City, ZheJiang Province, which is 1 of the most developed industrial areas in China. The company covers 28,000 square CHINAMFG with the floor area of 8,000 square meters.
Our main products include elevator bucket, drag conveyor flight, UHMW-PE sheet, PVC elevator belts, elevator bolts, belt fastener, conveyor chains and more than 4 hundred types components which are widely used in bulk material handling and storage industry.
CHINAMFG currently has more than 10 units of the whole series of 250-2500g injection molding machines, 1 production line of UHMW-PE sheet which is the higher pressure per unit in China, 1 special production line for PVC CHINAMFG woven belt, 1 production line of elevator bolts and nut, 1 production line for conveyor chains. We annually produce 5 million plastic elevator buckets, 2 million steel buckets, 500 tons of UHMW-PE products, 0.8 million square CHINAMFG of PVC CHINAMFG woven elevator belt, 15 billion sets of elevator bolts, and 60,000 CHINAMFG of conveyor chains.
Our company strictly in accordance with ISO9001 Quality Management System, and has obtained SGS certification. In order to raising working efficiency and reducing the cost of production, our company makes full use of computer network and ERP system to reform integration management in enterprise resource management, on the base of that, we have the ability to  provide high quality products with competitive price and best service to customers.
CHINAMFG believes the enterprise spirit of “integrity, pragmatic and innovative.” We will strive to become 1 of the best one-stop suppliers in the industry.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Steel/Satinless Steel
Structure: Conveyor Chain
Surface Treatment: Shot Peening
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

bush chain

Can a bush chain be used in abrasive or dirty environments?

Yes, bush chains are designed to operate effectively in abrasive or dirty environments. They are constructed using durable materials and have features that make them suitable for such conditions. Here are some key points to consider:

1. Material selection: When using a bush chain in abrasive or dirty environments, it’s important to select a material that can withstand the harsh conditions. Chains made from materials such as stainless steel or hardened steel are often preferred due to their high resistance to corrosion and abrasion.

2. Sealed or shielded design: To protect the chain from dirt, dust, and abrasive particles, some bush chains are available with sealed or shielded designs. These features prevent contaminants from entering the chain’s internal components, reducing the risk of premature wear and damage.

3. Proper lubrication: Lubrication plays a crucial role in the performance and longevity of a bush chain, especially in abrasive or dirty environments. Using a high-quality lubricant that can withstand the contaminants present is essential. It helps to reduce friction, prevent corrosion, and flush out debris, ensuring smooth operation of the chain.

4. Regular maintenance and cleaning: Regular maintenance is necessary to keep a bush chain operating optimally in abrasive or dirty environments. This includes cleaning the chain to remove built-up debris and contaminants that may impair its performance. Inspections should be conducted to identify any signs of wear or damage that require attention.

5. Protective covers or guards: In some cases, it may be beneficial to use additional protective covers or guards to further shield the bush chain from abrasive or dirty materials. These can provide an extra layer of protection and help extend the chain’s service life.

It’s important to consider the specific requirements of the application and consult with chain manufacturers or experts to determine the most suitable bush chain and maintenance practices for abrasive or dirty environments. By taking proper precautions and implementing appropriate measures, bush chains can effectively operate in these challenging conditions.

bush chain

How do you ensure proper tensioning and alignment of a bush chain?

Proper tensioning and alignment of a bush chain are crucial for its optimal performance and longevity. Here are the steps to ensure proper tensioning and alignment:

1. Tensioning:

– Consult the manufacturer’s guidelines: Refer to the manufacturer’s specifications or guidelines for the recommended tensioning method and tension values specific to the bush chain you are using.

– Check the sag: Measure the sag of the chain between two sprockets. The sag should be within the recommended range provided by the manufacturer. Adjust the tension as necessary to achieve the proper sag.

– Use a tensioning device: Depending on the application, you may use a tensioning device such as a tensioner or an idler sprocket to achieve the desired tension. These devices help maintain the tension over time as the chain wears.

2. Alignment:

– Visual inspection: Visually inspect the alignment of the chain with the sprockets. Ensure that the chain is properly seated on the sprocket teeth and running parallel to the sprocket shaft.

– Sprocket alignment: Check the alignment of the sprockets themselves. They should be aligned with each other and positioned correctly on their respective shafts.

– Adjustment: If misalignment is detected, make the necessary adjustments to align the chain and sprockets. This may involve repositioning the sprockets or adjusting the tensioning devices.

3. Regular inspection and maintenance:

– Periodically check the tension and alignment of the bush chain during routine maintenance. This ensures that any changes or deviations can be detected and corrected promptly.

– Monitor wear and elongation: Over time, bush chains may experience wear and elongation. Regularly measure the chain length or inspect for signs of elongation to determine if chain replacement or adjustment is necessary.

Proper tensioning and alignment of a bush chain optimize its performance, minimize wear, and reduce the risk of premature failure. Following the manufacturer’s guidelines and performing regular inspections and maintenance will help ensure the proper tensioning and alignment of the bush chain in your application.

bush chain

Can a bush chain be used in high-speed applications?

Yes, bush chains can be used in high-speed applications, but there are certain considerations to keep in mind. While bush chains are known for their durability and strength, they may have limitations in terms of their maximum allowable speed due to factors such as centrifugal forces and dynamic loads.

The speed capability of a bush chain depends on several factors, including the chain design, material, lubrication, and operating conditions. It is important to select a bush chain that is specifically designed for high-speed applications and to follow the manufacturer’s recommendations regarding speed limits.

In high-speed applications, it is crucial to ensure proper chain tensioning and alignment to minimize vibration and reduce the risk of chain failure. Regular maintenance, including lubrication and inspection, is also essential to prevent premature wear and extend the service life of the chain.

Additionally, the selection of a suitable lubricant is important for high-speed bush chain applications. The lubricant should have excellent film strength and provide sufficient protection against wear and friction at high speeds. It is recommended to consult with the chain manufacturer or a lubrication specialist to determine the most suitable lubrication solution.

Overall, while bush chains can be used in high-speed applications, it is essential to consider the specific requirements and limitations of the application and to ensure proper maintenance and lubrication to achieve reliable and efficient operation.

China high quality Conveyor Slat Chains Bush Roller Chain Used in Horizontal Scraper Conveyor  China high quality Conveyor Slat Chains Bush Roller Chain Used in Horizontal Scraper Conveyor
editor by CX 2024-04-09